[TimeWave-AEA] PK-232 / DSP and related items FS

[Ken, W8EK]

Digital Interfaces and related items For Sale:
.
.
AEA/Timewave PK-232 DSP Digital Controller:

The AEA PK-232 has long been the standard which others have
been compared.  It is a multimode controller, and does not
require the use of your sound card in your computer to work
in most all digital modes.  This unit was originally a PK-232,
but has had the DSP upgrade making it even more useful.  It
is now capable of the following modes:
RTTY-Baudot
RTTY-ASCII
PACTOR
Packet 300 bps HF
Packet 1200 bps VHF
Morse
FAX HF
AMTOR
SITOR
NAVTEX
TDM

The DSP adds even sharper filters than the original.

Features include
Digital Signal Processor
16 Bit A/D-D/A
18 DSP Filters
Twin Peak RTTY Filters
Adaptive PACTOR filters
100 Hz CW Filter
Automatic Operation
All standard modes

More info at
http://www.timewave.com/support/PK-232/PK232DSP.html

This unit works fine and looks really great.  It includes
cables to the computer, two radio (mic) cables, two receive
audio cables, connector for scope, and power cord.  There
is a CD that includes a very detailed manual, plus other
digital information.

Buy all of this for only $250.
.
.

Extra Cables for use with AEA PK-232 Digital Controller:

The AEA PK-232 uses a sort of odd five pin inline
plastic connector.  All of these cables have that
connector on one end, complete with shrink
tubing, and are original AEA.

PK-232 to Icom 24 pin accessory plug
This 24 pin plug is used on rigs like the IC-751 plus
many others.  It permits one to plug into the back
of the rig.  Both of these connectors are somewhat
rare. $20

PK-232 to Kenwood round 8 pin
The 5 pin plug on one end, and a round 8 pin mic plug
on the other, wired for Kenwood.  $15

PK-232 to unterminated cable
The 5 pin plug on one end, and nothing on the other end,
permitting one to add their own connector.  $10
.
.

Cable for Icom Transceiver to Digital Controller:

The package says "The Country Ham RTC2-Ic", TNC-Radio
Cable w/ DIN and Mike Plug. For use with MFJ, AEA, and
PacComm TNCs using a 5 pin DIN plug. The opposite
end has a round Icom 8 pin connector as used on most
Icom rigs. Pin outs are listed on the label.

There is also an attached cable with 1/8 inch plug to
go to the speaker jack.

This cable is apparently new, still in its original bag.
$12
.
.
.
I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.
.

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400







.