From kenw8ek at gmail.com Fri Jun 30 13:24:13 2017 From: kenw8ek at gmail.com (Ken, W8EK) Date: Fri, 30 Jun 2017 13:24:13 -0400 Subject: [TimeWave-AEA] PK-232 / DSP and related items FS Message-ID: <0c56eda7-3a68-9b85-d56e-027b09faa36f@gmail.com> Digital Interfaces and related items For Sale: . . AEA/Timewave PK-232 DSP Digital Controller: The AEA PK-232 has long been the standard which others have been compared. It is a multimode controller, and does not require the use of your sound card in your computer to work in most all digital modes. This unit was originally a PK-232, but has had the DSP upgrade making it even more useful. It is now capable of the following modes: RTTY-Baudot RTTY-ASCII PACTOR Packet 300 bps HF Packet 1200 bps VHF Morse FAX HF AMTOR SITOR NAVTEX TDM The DSP adds even sharper filters than the original. Features include Digital Signal Processor 16 Bit A/D-D/A 18 DSP Filters Twin Peak RTTY Filters Adaptive PACTOR filters 100 Hz CW Filter Automatic Operation All standard modes More info at http://www.timewave.com/support/PK-232/PK232DSP.html This unit works fine and looks really great. It includes cables to the computer, two radio (mic) cables, two receive audio cables, connector for scope, and power cord. There is a CD that includes a very detailed manual, plus other digital information. Buy all of this for only $250. . . Extra Cables for use with AEA PK-232 Digital Controller: The AEA PK-232 uses a sort of odd five pin inline plastic connector. All of these cables have that connector on one end, complete with shrink tubing, and are original AEA. PK-232 to Icom 24 pin accessory plug This 24 pin plug is used on rigs like the IC-751 plus many others. It permits one to plug into the back of the rig. Both of these connectors are somewhat rare. $20 PK-232 to Kenwood round 8 pin The 5 pin plug on one end, and a round 8 pin mic plug on the other, wired for Kenwood. $15 PK-232 to unterminated cable The 5 pin plug on one end, and nothing on the other end, permitting one to add their own connector. $10 . . Cable for Icom Transceiver to Digital Controller: The package says "The Country Ham RTC2-Ic", TNC-Radio Cable w/ DIN and Mike Plug. For use with MFJ, AEA, and PacComm TNCs using a 5 pin DIN plug. The opposite end has a round Icom 8 pin connector as used on most Icom rigs. Pin outs are listed on the label. There is also an attached cable with 1/8 inch plug to go to the speaker jack. This cable is apparently new, still in its original bag. $12 . . . I also have many other accessories available such as many different types of microphones, HTs, VHF and UHF rigs, HF and VHF/UHF antennas, connectors, miscellaneous accessories, etc. Just too many to list here. Please e-mail your requests. . Prices do not include shipping from Florida. Thanks. 73, Ken, W8EK Ken Simpson E-mail to W8EK at FLHam.net or W8EK at arrl.net Voice Phone (352) 732-8400 .