[TimeWave-AEA] PK-232 w/ TS-570D(G)

Wed, 16 Jan 2002 08:34:12 -0500

True if all you want to run is with the TNC, but with the soundcard
adapter in the PK-232, I think you'd end up having to switch cables on
the PK-232 from the Radio 1/2 connector to the FSK connector and back,
even with the soundcard adapter installed in the TNC. The whole idea is
not to have to switch cables when going between TNC modes and soundcard
modes.

73, Ray W2EC

Ged wrote:
> 
> In message <[email protected]>, "Ray, W2EC"
> <[email protected]> writes
> >The wiring info specific to the 570 won't be in the 232 manual, it will
> >be in the 570 manual itself. Look at the 232 manual and you'll see you
> >need receive audio coming in from the receiver (the 570), transmit audio
> >going out to the transmitter (the 570), a PTT line to key the
> >transmitter (the 570) and ground. Only four wires. You can also hook up
> >squelch but that's mainly used on VHF not HF.
> 
> Forget using AFSK and use FSK instead. Apart from its other advantages
> you also get the benefit of a direct freq. readout on your rig. No more
> adding or subtracting !
> 
> --
> Ged
> _______________________________________________
> TimeWave-AEA mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/timewave-aea