[TheForge] Grasshopper Treadle Hammer Plans Online?

[Edwin Eccleston]

 I would also buy a set. I want to set up a blacksmith shop at the Trade School I teach at.
Ed Eccleston


    On Monday, November 17, 2025 at 06:49:07 PM PST, J. Petrila <jlpservicesinc at gmail.com> wrote:  
 
 I'd buy a set of plans and binder right now.

I went looking not long ago for cricket plans and was out of luck.

Let's do this.  Thanks Jennifer

JLP Services Inc
6 Kenwood Dr
Rutland, MA 01543-1215

1 (508) 667-5498

On Mon, Nov 17, 2025, 5:15 PM <lorne at smithlist.net> wrote:

> I can put it on https://smithlist.net if you like, it gets a fair bit of
> traffic.
>
> Cheers,
> Lorne
>
> On 2025-10-28 22:05, Bruce wrote:
> > Some of you may remember my Grasshopper Treadle Hammer.  Back a decade
> > or
> > more, I sold plans for this hammer via ebay.  I quit doing that because
> > I
> > couldn't even break even on it.  (It's about 120 pages and I sold it in
> > a
> > binder.)
> > I'm thinking of posting it online for viewing and there are a couple
> > considerations I need mull over before I could do that.
> >
> >    1. Should I revise the plans first, and, if so, how?  When I
> > designed
> >    this treadle hammer, I did not myself know how to weld.
> > Accordingly, some
> >    of the assembly is by screws and bolts, and some of these might
> > better be
> >    welded.  In principal, I could modify all relevant drawings to
> > indicate
> >    welds, but this could take a long time to accomplish as it would be
> > a fair
> >    investment in time (always short).  Alternatively, I could annotate
> > where
> >    welding be recommended in lieu of the indicated fasteners, either on
> > the
> >    drawings themselves, or on a separate sheet listing such changes,
> > the
> >    latter being the least work & time required.
> >    2. Where could I post it?  Perhaps on my Grasshopper webpage -- if
> > it
> >    can accept this quantity of drawings.  Perhaps in Google Docs, in
> > which
> >    case I'd want some way of limiting access to read-only. (I think
> > that can
> >    be done, but haven't used Gdocs enough to know.)
> >
> > What do you think?
> >
> > Bruce
> > NJ
> > ______________________________________________________________
> > TheForge mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/theforge
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:TheForge at mailman.qth.net
> >
> > TheForge mail list group photo site is
> > http://www.shutterfly.com
> > Login: blacksmithblacksmith at hotmail.com
> > Password: anvil
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to lorne at smithlist.net
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.shutterfly.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jlpservicesinc at gmail.com
>
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to edeccleston at att.net