[TheForge] repairing sheet metal

[Ron Childers]

Be sure to coat both sides with a rust preventive primer and paint

-----Original Message-----
From: TheForge [mailto:theforge-bounces at mailman.qth.net] On Behalf Of Charles
Sent: Friday, November 18, 2016 12:34 PM
To: terry l. ridder <terrylr at blauedonau.com>; Blacksmithing List Sponsored by ABANA <theforge at mailman.qth.net>
Subject: Re: [TheForge] repairing sheet metal

Gas welding generally results in a softer more pliable sheet.  I gas weld autobody panels that I am going to have to do hammer and dolly work on for this reason. Charles

 
      From: terry l. ridder <terrylr at blauedonau.com>
 To: theforge e-mail list <theforge at mailman.qth.net>
 Sent: Friday, November 18, 2016 11:29 AM
 Subject: [TheForge] repairing sheet metal
   
hello

I have an old generator with a propane fueled engine.
The blower housing sheet metal has torn. the generator now makes all kinds of noise with the blower housing rattling constantly.

There are no repair parts available for the engine given its age.
Only 20 years old but they claim that that is too old.

   
 
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to ron at munlaw.net