[TheForge] bolt thread repair tool

Rob Fertner rfertner at cox.net
Tue Feb 24 18:50:55 EST 2015


I have a 12 x 12 shop in my backyard. It's pretty basic. Coal forge, anvil,
treadle hammer, tool rack, and small work bench. Post vise is mounted on
mobile base.
It's on a 6 inch concrete slab with extra rebar around the edges. One of
these days I need to insulate it and wire it for electricity.
We have a company here called All Sheds. They custom build the shed for you.
The skin is cement board with cedar trim and if you paint it within a week
of them putting it up, they guarantee the building for 50 yrs against rot.
I went with 144 sq ft slab because in Wichita any less than 150sq ft only
requires a $15 building permit. If I didn't have a permanent foundation I
wouldn't need a permit.

Rob
Wichita KS

-----Original Message-----
From: TheForge [mailto:theforge-bounces at mailman.qth.net] On Behalf Of Chris
Caswell
Sent: Tuesday, February 24, 2015 4:45 PM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] bolt thread repair tool

This is going to strictly be a hand forging shop - I have a shop in the
basement for non blacksmith stuff. (Like restoring A10-A bubble sextants)

Chris Caswell
Colchester VT

On 2/24/2015 5:35 PM, Susan and Lynn Lang wrote:
> Chris
> 12¹ x 12¹ is not big enoughŠŠ..16¹ x 24¹ would be a starting size.
>
> lynn
>
> On 2/24/15, 5:11 PM, "Chris Caswell" <olayers at sover.net> wrote:
>
>> We have also had north winds blowing, with wind chills to 35 F 
>> below.........Lake Champlain froze over in February (normally if it 
>> does not freeze in January, it does not freeze at all) I've 'bout had 
>> enough.
>>
>> If it ever does thaw, I hope to build a new 12' x 12' shop in the 
>> backyard, on concrete columns (sono tube)......any thoughts on that?
>>
>> Chris Caswell
>> Colchester VT
>>
>> On 2/24/2015 2:21 PM, Mike Spencer wrote:
>>>> Thank you Toasty...
>>> Same.
>>>
>>>> ...15 below here in Northern Vermont.
>>> Last night was the coldest night here in my corner of Nova Scotia in 
>>> many years, 5 below, the accumulated snowfall is the most since 1990 
>>> and, before they sanded our road yesterday, I could say that I'd 
>>> voluntarily gone skating on worse ice surfaces.
>>>
>>> OTOH, the last time I was in Vermont, 1976, it was 20 below at dusk 
>>> somewhere near White River Junction, 25 below before we got to 
>>> Epsom, NH and, after a warm-up break in Epsom, we drove through a 
>>> blizzard from there all the way to the Canadian border at Calais, 
>>> ME.  So I feel a little sheepish when I grumble about 5 below and 
>>> some snow when I can set by the fire and look out at it.
>>>
>>> Close personal friend of Toasty, (You hear that, you out there in 
>>> the sky?  Listen up!)
>>>
>>> - Mike
>>>
>> ______________________________________________________________
>> TheForge mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TheForge at mailman.qth.net
>>
>> TheForge mail list group photo site is http://www.shutterfly.com
>> Login: blacksmithblacksmith at hotmail.com
>> Password: anvil
>>
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is http://www.shutterfly.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.5646 / Virus Database: 4299/9174 - Release Date: 
> 02/24/15
>
>
>

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.shutterfly.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



More information about the TheForge mailing list