[TheForge] now for something completely different

[Bruce .]

Can you link us to pictures or diagrams of these devices?  I've never seen
one.

Bruce
NJ


On Thu, Jan 2, 2014 at 10:45 AM, terry l. ridder <terrylr at blauedonau.com>wrote:

> hello;
>
> For several months I have been observing people who quilt spend in my
> opinion far too much money and time on something that should not be
> overly expensive nor complicated; a quilting frame.
>
> quilting frame is basically a laminating frame. there is a top, a
> middle and a bottom. normally, there are four rollers. the take-up
> roller, the top supply roller, the middle supply roller and the bottom
> supply roller. These layers are secured together with thread sewn with a
> long-arm sewing machine. the take-up roller is generally located to the
> right of the needle above the free-arm. originally, the quilting was
> perfomed by hand with needle and thread. somewhere along the line the
> meaning of simple and simplicity have been lost in building quilting
> frames.
>
> i have seen two models of quilting frames which have servo motors
> driving the rollers, acme screws driven by servo motors which drive the
> long arm sewing machine back and forth, fore and aft. all under the
> control of a computer running a CNC program.
>
> there are many intelligent people on theforge from many different
> careers and occupations. in the spirit of the Junk-Yard-Hammer, could we
> brainstorm to come up with a simple design for a quilting frame that is
> inexpensive to build, simple to operate and fullfills the original
> purpose of the quilting frame, sew three layers together.
>
> to start off my first thoughts were to use a gantry type frame. instead
> of rollers the layers are laid out flat and held in place either by
> metal clips or clips on bungee cords. the draw back is the long arm
> sewing machine.
>
> the cost of long arm sewing machines is another area that needs to be
> addressed at a different time.
>
> anyway, there it is. comments, flames, hints, suggestions, etc welcome.
>
> --
> terry l. ridder ><>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.shutterfly.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>