[TheForge] how to set up for a wheelchair bound smith

[Ron Childers]

_______<-->  Could the anvil be put on an extended arm like the bed tray
holders used in the hospital? That way he could 
|             position the anvil where he wants it, especially if he had
a couple of locking swivels. 
|
|
|









-Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Richardson,
Grover
Sent: Friday, February 03, 2012 10:19 PM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] how to set up for a wheelchair bound smith

If the fella can stand, a rail set up around the anvil for him to lean
against is the best IMHO.  I have a brother in a wheel chair and there
is no good place to put an anvil.  Many modern wheel chairs have
electric controls set up to be conveniently placed, but this also makes
them in the exact wrong place for swinging anything.

The best solution we have found is a welding blanket in the lap and all
over everything, but that gets very hot.  And the individual may not
have heat sensitivity in the areas which need it, particularly if
something hot falls.

There are a lot of things that may be made cold forging.......  And then
relieving the stresses.....

Please keep us appraised of what happens.  There is interest.

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Jim Guy
Sent: Wednesday, February 01, 2012 8:26 PM
To: TheForge at mailman.qth.net
Subject: [TheForge] how to set up for a wheelchair bound smith

Quite some time ago there was a thread on TheForge on setting up a shop
to
teach handicapped students and .   There's a man in our guild who is
striving to help a wheel-chair bound friend get into blacksmithing, and
possibly do something for the Wounded Warrior project.

 

What have you found works?  (shop layout, anvil position)

 

How do you protect the person and their wheel chair?

 

Where can we go for more information?

 

 

 

Jim 

Conyers, Ga.

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html