[TheForge] OT - Water pressure problem.

[Larry Brown]

You could use plastic barrels and pipe them together. Put the tank or tanks 
in the garage peak? NG for the winter but beats the living room.. Could 
always use the attic if you trust your plumbing work.
  The other option is to use a strong enough pump with a relief for when 
you shut the nozzle. Marshall might have stuff for that around.
Larry Brown


At 06:05 PM 5/14/2011 -0400, you wrote:
>Once again I'm using the broad knowledge base represented by this
>group for an OT problem.
>
>I have just installed rain barrels at all my downspouts, including a
>250-gallon tank at one of them.  I plan to siphon or pump water
>between them to maximize capacity.
>
>However, none of these are more than 16" above the ground -- two
>cement blocks.  That means that there's little water pressure
>available, making using the water inconvenient.  I could rig a pump to
>go on anytime I need water, but a more elegant solution would be to
>use that pump to keep an elevated tank (water tower) filled between
>limits.
>
>What I'm thinking is to use a fairly small plastic tank -- 15 or 20
>gallons (i.e., ~150 lbs maximum), and to mount it high enough to
>provide reasonable water pressure.  In use, the pump would probably
>come on every once in a while, because the tank would be fairly small,
>but at least it wouldn't be running continuously or with no flow.
>
>Now, to get 15psi I'd need a tower of over 30', and that's out of the
>question.  I'd like something as low as possible and as small as
>possible.  So, the first question is what is the lowest useful water
>pressure for use around yard and garden?  I don't need to run
>sprinklers, but would like to use drip hoses.
>
>Possibly a water tower isn't the proper solution.  What other
>solutions exist?  What I'm aware of is a pressurized system, in which
>the pump fills an accumulator tank, or something of the sort, which
>then discharges for a while before the pump comes on again.  This
>strikes me as expensive, and i'd like to keep expenses low.
>
>If it were possible to do, one potentially elegant solution would be
>an accumulator tank that would be filled either with city water or
>pumped rain water.  There'd have to be a barrier between them, and the
>side that would accept the city water would have to be clean and
>isolated from the rain water side (which must be assumed to be
>contaminated with various environmental contaminants, not the least of
>which would be bird feces).  If I put a check valve to keep the "city
>water" from backing up into the city piping, this might even be legal!
>  I toss it out mainly for discussion, as I really don't see much
>advantage relative to an air bladder accumulator.
>
>So, regale me with your wisdom, o metalworkers and artists of reality!
>--
>Bruce
>NJ
>______________________________________________________________
>TheForge mailing list
>Home: http://mailman.qth.net/mailman/listinfo/theforge
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:TheForge at mailman.qth.net
>
>TheForge mail list group photo site is
>http://www.photoworks.com
>Login: blacksmithblacksmith at hotmail.com
>Password: anvil
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html