[TheForge] Hydraulic Press

[Mark A. Pesetsky]

Thank You Sir!!

Mark
________________________________________
From: theforge-bounces at mailman.qth.net [theforge-bounces at mailman.qth.net] on behalf of John Allen [countrymetals at gmail.com]
Sent: Saturday, March 19, 2011 10:02 AM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] Hydraulic Press

Oh, and one other things. When I worked for a steel company 3 years ago, we
bent some 3/8" plate 3'x9' into 3'x3'x3' cubes. When we did the second bend,
the material bubbled up. Why... because the material came from china and
still had the remains of tin cans in the steel. So watch where you buy
material from when you build it. Make sure it is from USA which has a max of
25% scrap instead of china and taiwan which can be 100% in scrap.

--
John Allen
Country Metals, LLC
(856) 542-4316 (cell)
(856) 504-0087 (fax)
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html