[TheForge] OT switch

[jstapleford at hvc.rr.com]

Looks like a common problem,  googleing that P/N brings up a lot of discussion.  Cherry E-23 looks like a good replacement.  


---- Larry Brown <lp.brown at verizon.net> wrote: 
> Hi
> I know we have a varied group here so I will ask for help on this.
> I had to replace the zone valve in my heating system, cost $80.
> The problem with the valve is the "end" switch which turns things on after 
> the valve opens. This is a small micro switch which should let the system 
> know the valve is open and the heat can start.
> 
> Number on the  switch is:
> V5C010SB3X147
> It is Rated  11A 1/3 HP125/250 VAC
> and is about 1 1/8 long x 5/8 high x 3/8 thick having mounting holes 15/16 
> apart diagonally on it
> 
> Anyone know of a source?
> 
> Larry Brown
> 
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html