[TheForge] falling anvil

[dan tull]

farriers anvil for curving horseshoes
----- Original Message ----- 
From: "Bruce Freeman" <freemab222 at gmail.com>
To: "Blacksmithing List Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Tuesday, March 01, 2011 3:36 PM
Subject: [TheForge] falling anvil


> While boning up on transistors, I came across a picture of Homer
> Simpson on the wrong side of a falling anvil.
> 
> http://www.ittc.ku.edu/~jstiles/312/handouts/312_Introduction_package.pdf
> & scroll down to page 5.
> 
> The anvil is an Arm & Hammer, but what are the chunks out of the tail?
> Anyone recognise what such an anvil would be used for?
> 
> -- 
> Bruce
> NJ
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html