[TheForge] Home-made grinders and wire brushes

[Grover.Richardson at gtri.gatech.edu]

Slide-On Protective Side Shields

Just slide the arms of your glasses through the webs on these shields to get the side protection you need. They're made of flexible PVC and provide 100% UV protection. Meet ANSI Z87.1-2003 high-impact (also known as Z87+) standards.
Color	 	Per
Pair
Clear	2571T1	$3.44
Gray	2571T2	3.44
Green	2571T3	3.44

McMaster Carr.  Other folks will have them as well.


-----Original Message-----
From: theforge-bounces at mailman.qth.net [mailto:theforge-bounces at mailman.qth.net] On Behalf Of Lynn Emrich
Sent: Saturday, June 25, 2011 10:57 AM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] Home-made grinders and wire brushes

Has anyone run across the clip on side shields for glasses?
Thanks, Lynn




----- Original Message ----
From: peter fels <artgawk at thegrid.net>
To: Blacksmithing List Sponsored by ABANA <theforge at mailman.qth.net>
Sent: Thu, June 23, 2011 9:53:05 PM
Subject: Re: [TheForge] Home-made grinders and wire brushes

By contrast, there's the advice in Alexander Weiger's book to the effect that;
Real professional blacksmiths just squint when grinding.
Never been able to find it since, but somewhere i have an old metal working book 
from WW1 showing 

row on row of worker's faces, wearing the glasses they were wearing at the time 
of the accident.
Each one of them has a missing or damaged eye, showing from behind the shattered 
lenses.
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html