[TheForge] Electric forge blower

[peter fels]

Sure Paul...Stick the vac outside somewhere to suck up skeeters?
If i recall right , a  brushless motor coupled with a cheap HF router speed control,
ought to mount right on your blower stand, out of the way.

On Jun 17, 2011, at 6:31 PM, Paul N wrote:

> Thanks Peter,
> As it is, I'll probably wait until after the UMRBC conference to order 
> something. But I don't often see electric blowers at the conferences 
> around here.
> 
> I don't want to go the hair dryer or shopvac route because of the noise. 
> I'm assuming the blowers like the one from Kayne and Son are 
> considerably quieter.
> 
> I didn't realize that an auto heater blower had sufficient "oomph" for a 
> coal forge. I'll have to give that some consideration.
> 
> While I like the idea of adding a motor to my existing setup. It would 
> have to be reasonably compact. My "shop" occupies some space in the 
> garden shed, and I have to pull everything outside to work. Although 
> with a longer tube, I might be able to leave the blower in the shed, and 
> have one less thing to move. I'm liking that idea. Although I hope to 
> move some of the other crap out of the shed and make it a more useable 
> indoor shop. That's particularly attractive right now where, after a 
> very wet spring, the mosquitoes have taken over. Working outdoors after 
> I get home from the day job is not practical.
> 
> **paul
> 
> On 6/17/2011 6:08 PM, peter fels wrote:
>> PS...or just get a small gear head motor and pulleys and power your existing blower.
>> On Jun 17, 2011, at 3:49 PM, Paul N wrote:
>> 
>>> Hey guys, I'm getting tired of cranking the centrifugal blower by hand,
>>> and I'm thinking about buying an electric blower (while I kick myself
>>> for selling one that was attached to a surplus forge I had a couple
>>> years back... But I wanted that forge to go quickly, and it did..)
>>> 
>>> I'll be driving a coal forge. Not a huge forge, but it has a firepot of
>>> about 11" in diameter.
>>> 
>>> At the moment, the top candidate is a 164CFM 40oz static pressure model
>>> from Kayne and Son:
>>> https://www.blacksmithsdepot.com/page.php?theLocation=/Resources/Product/Forges_and_Parts/blowers/164_CFM_Blower.xml/
>>> 
>>> They used to carry a bigger model, but it's out of stock, and they
>>> aren't getting any more.
>>> 
>>> I see Centaur Forge also carries one, but I'm hoping to keep this under
>>> $300.
>>> 
>>> So, does anyone have experience with the 164CFM model? Or perhaps a
>>> recommendation for some other source?
>>> 
>>> **Paul
>>> ______________________________________________________________
>>> TheForge mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:TheForge at mailman.qth.net
>>> 
>>> TheForge mail list group photo site is
>>> http://www.photoworks.com
>>> Login: blacksmithblacksmith at hotmail.com
>>> Password: anvil
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>> ______________________________________________________________
>> TheForge mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TheForge at mailman.qth.net
>> 
>> TheForge mail list group photo site is
>> http://www.photoworks.com
>> Login: blacksmithblacksmith at hotmail.com
>> Password: anvil
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html