[TheForge] Electric forge blower

[peter fels]

PS...or just get a small gear head motor and pulleys and power your existing blower.
On Jun 17, 2011, at 3:49 PM, Paul N wrote:

> Hey guys, I'm getting tired of cranking the centrifugal blower by hand, 
> and I'm thinking about buying an electric blower (while I kick myself 
> for selling one that was attached to a surplus forge I had a couple 
> years back... But I wanted that forge to go quickly, and it did..)
> 
> I'll be driving a coal forge. Not a huge forge, but it has a firepot of 
> about 11" in diameter.
> 
> At the moment, the top candidate is a 164CFM 40oz static pressure model 
> from Kayne and Son: 
> https://www.blacksmithsdepot.com/page.php?theLocation=/Resources/Product/Forges_and_Parts/blowers/164_CFM_Blower.xml/
> 
> They used to carry a bigger model, but it's out of stock, and they 
> aren't getting any more.
> 
> I see Centaur Forge also carries one, but I'm hoping to keep this under 
> $300.
> 
> So, does anyone have experience with the 164CFM model? Or perhaps a 
> recommendation for some other source?
> 
> **Paul
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html