[TheForge] need help on a project

Mon Aug 1 22:19:24 EDT 2011

Actually, he has a lot of good economical tool building info and advice in it as well.  It's got a lot of good info for such a relatively small book.
Sent from my BlackBerry® smartphone powered by Alltel

-----Original Message-----
From: peter fels <artgawk at thegrid.net>
Sender: theforge-bounces at mailman.qth.net
Date: Mon, 1 Aug 2011 19:14:39 
To: Blacksmithing List Sponsored by ABANA<theforge at mailman.qth.net>
Reply-To: Blacksmithing List Sponsored by ABANA <theforge at mailman.qth.net>
Subject: Re: [TheForge] need help on a project

I don't have much interest in knife making really...
looks to be a saturated field without enough room for my creative misdirections.
Even the corkscrews and bottle openers feel restrictive at this point.

On Aug 1, 2011, at 6:15 PM, Andrew Vida wrote:

> Buy the damned book.
> 
> You will not be sorry.
> 
> On 8/1/2011 7:17 PM, peter fels wrote:
>> OK...I'm intrigued,
>> but not enough to buy the good fellow's book.
>> Could you be talked into giving a summary?
>> 
>> A related Q.
>> These methods need to be quick enough not to fry the handle...
>> Is the necessity to "soak" near the critical temperature offset by the thinness?
>> 
>> 
>> On Aug 1, 2011, at 4:04 PM, blakkpawss at yahoo.com wrote:
>> 
>>> Simple solution, use the semi-solid quenchant method that Wayne Goddard uses.  Tried and true.  Available in his book The $50 Knife Shop.
>>> Sent from my BlackBerry® smartphone powered by Alltel
>>> 
>>> -----Original Message-----
>>> From: peter fels<artgawk at thegrid.net>
>>> Sender: theforge-bounces at mailman.qth.net
>>> Date: Mon, 1 Aug 2011 16:01:15
>>> To: Blacksmithing List Sponsored by ABANA<theforge at mailman.qth.net>
>>> Reply-To: Blacksmithing List Sponsored by ABANA<theforge at mailman.qth.net>
>>> Subject: Re: [TheForge] need help on a project
>>> 
>>> The induction heater sounds like a fun solution...
>>> Shame they're still so expensive.
>>> Iron hot block sounds good too...
>>> Thanks Paul.
>>> 
>>> 
>>> On Aug 1, 2011, at 3:47 PM, Paul wrote:
>>> 
>>>> If you have access to an induction heater in one of your friends shops,
>>>> you could easily heat the edge with the handle in place and quench the
>>>> edge without a problem. I have not used the 'heat a LARGE block of iron
>>>> and heat the edge with that' method but I could see where that would
>>>> work also... I can, however, tell you that the induction heater does
>>>> work very well.
>>>> 
>>>> paul
>>>> WB9HCO
>>>> No trees were killed in the generation of this message,
>>>> but a tremendous number of electrons were terribly inconvenienced
>>>> 
>>>> On 08/01/2011 05:28 PM, peter self wrote:
>>>>> For the application, an edge quench makes sense.
>>>>> 
>>>>> But, just for discussion.....
>>>>> I have a few old favorite knives that have been sharpened many times over the years,
>>>>> so much so, that they are ground past the hardened edge and have become too soft to keep an edge.
>>>>> I've goofed around with work hardening the edge, with very modest success.
>>>>> Seems too much trouble to strip them, re-heat treat them and rehandle them.
>>>>> I've mused about wrapping the handle in a wet rag and re-edge hardening them with a torch...Haven't tried yet.
>>>>> 
>>>>> Last..grousing;
>>>>> Our pleasant house sitter was very effective at dulling the kitchen knives..presumably sawing her preferred veggies
>>>>> on the stone countertop and the ceramic plates.   Arrrrrrg!
>>>>> 
>>>>> On Aug 1, 2011, at 1:18 PM, Ron Childers wrote:
>>>>> 
>>>>> <SNIP>
>>>>______________________________________________________________
>>>> TheForge mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:TheForge at mailman.qth.net
>>>> 
>>>> TheForge mail list group photo site is
>>>> http://www.photoworks.com
>>>> Login: blacksmithblacksmith at hotmail.com
>>>> Password: anvil
>>>> 
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>> 
>>>______________________________________________________________
>>> TheForge mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:TheForge at mailman.qth.net
>>> 
>>> TheForge mail list group photo site is
>>> http://www.photoworks.com
>>> Login: blacksmithblacksmith at hotmail.com
>>> Password: anvil
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>______________________________________________________________
>>> TheForge mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:TheForge at mailman.qth.net
>>> 
>>> TheForge mail list group photo site is
>>> http://www.photoworks.com
>>> Login: blacksmithblacksmith at hotmail.com
>>> Password: anvil
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>>______________________________________________________________
>> TheForge mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TheForge at mailman.qth.net
>> 
>> TheForge mail list group photo site is
>> http://www.photoworks.com
>> Login: blacksmithblacksmith at hotmail.com
>> Password: anvil
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html