[TheForge] Log tongs?

[Bob Ehrenberger]

Mike,

Thanks for the picture.  It took me several tries to get into the picture 
site but did make it.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net

----- Original Message ----- 
From: "mike shpeley" <willowforge at yahoo.ca>
To: "Bob Ehrenberger" <eforge at centurytel.net>; "Blacksmithing List Sponsored 
by ABANA" <theforge at mailman.qth.net>
Sent: Tuesday, October 19, 2010 9:59 PM
Subject: Re: [TheForge] Log tongs?


Bob
As a picture is worth a thousand words, I posted a picture in photo access 
under
shpeley album of a set  that I know works well as I have made and tested a
number of them.  three eighths round is the usual material for a 24 inch 
set. 7
sixteenths round may be better for 32 in length. The  overlap at the pinhole 
is
about one and half inches. For wood stoves the business end holds the log
parallel to the handle.
Mike




----- Original Message ----
From: Bob Ehrenberger <eforge at centurytel.net>
To: theforge <theforge at mailman.qth.net>
Sent: Tue, October 19, 2010 8:00:35 AM
Subject: [TheForge] Log tongs?

This last weekend I had someone request a pair of fire place, log tongs. I
have never made these. Do you have any suggestions on the design /
porportions of such tongs.  He wants them to be 32" total length so I was
thinking 10" for the jaws and 22" for the handles. I would appriciate input
from those of you that have made them.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net

______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoaccess.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html