[TheForge] fireplace crane hardware

[Bob Ehrenberger]

I got in to examine a couple of the historic homes today.  Both of them were 
set up like this, One of them even had two holes in the lower plate like 
they had some other device that used to hang there beside the crane.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net

----- Original Message ----- 
From: <williamsiron at comcast.net>
To: "Bob Ehrenberger" <eforge at centurytel.net>; "Blacksmithing List Sponsored 
by ABANA" <theforge at mailman.qth.net>
Sent: Sunday, November 21, 2010 9:43 PM
Subject: Re: [TheForge] fireplace crane hardware




Bob,



What I've seen on the Eastern Shore is two pieces of strap about 2 - 3 
inches wide and 3/8 to 1/2 inch thick with a hole of perhaps 3/4" diameter 
at the one end mortared into the brick wall of the fireplace/hearth. The 
upper pin is longer than the lower to facilitate mounting.



In addition to Sonns' Early American Wrought Iron, you could look at "Hooks, 
Rings and Other Things" by Barnes or "The American Hearth" by Barons and 
Card ISBN 0-937318-23-X



Mark Williams

Snow Hill, Maryland
----- Original Message ----- 
From: "Bob Ehrenberger" <eforge at centurytel.net>
To: "theforge" <theforge at mailman.qth.net>
Sent: Saturday, November 20, 2010 5:21:33 PM
Subject: [TheForge] fireplace crane hardware

I've got a customer that wants a fireplace crane for an 1840's German colony
house that she is restoring. Making the crane itself is no problem, but I'm
unsure about period correct mounting hardware. It is my guess that the top
pivot point would have feathered edges and be mortered into the side of the
fireplace. I have no idea what the bottom pivot should look like, a plate
with anchor bolts holding it in place? A plate recessed in the hearth and
mortered into place? Maybe a just a hole in one of the hearth bricks? Or
maybe a large hole with a washer mortered in place?

I've been looking through my blacksmith books and can't find the details I
need.


Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net


______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoworks.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html