[TheForge] Equipment for a newbie

[peter fels & phoebe palmer]

On 11/7/2010 5:00 AM, Andrew Vida wrote:
> Teenage smith, eh?  Another one bites the dust!
>
> Welcome, Matt. ;)
He gets to chew it too!
Welcome to the black booger brotherhood Matt.
> Matt Gallagher wrote:
>> I'm looking for some new or used equipment, such as a blower, forge if
>> possible, and some hammers. Some of you might remember my post a while back
>> asking for an anvil for a project. Ive found one, and now all i need is more
>> equipment. I can make the forge, thats not a problem. (although it would be
>> nice to get one pre-made (: ) I just need, at minimum, a blower. If anyone
>> has one, knows where i can get a cheap one, or has instructions on how to
>> make one, I would be happy to compensate. I have a sufficient hammer, its a
>> fairly large ball-peen.My first project is to make a more suitable hammer,
>> for which I have found several places where i can get instructions. So my
>> only problem really is an air-source. I contemplated making a blower, even a
>> set of bellows, but then remembered this forum and decided to give it a try.
>> Christmas is coming up, and my family has been dogging me for a list of what
>> I want. Something like this would both make an awesome gift, and make their
>> lives easier.
>> (PS.- I have around 100-150 lbs of charcoal, which i believe will work
>> sufficiently for fuel. I made it myself from hardwood [oak, cedar, and
>> maple] and some pine. I have been able to get steel to working temperature
>> with this in an outdoor fire pan with a blow pipe, but I would like a blower
>> so I don't have to inhale as much smoke or waste my oxygen. Any comments or
>> suggestions are welcome.)
>> (PS v.2.0- I have several designs for forges which I would like to share
>> with all of you out there for feedback, but my scanner is broken at the
>> moment. when I get it fixed, I will send out the best of these plans. I will
>> try to make them as understandable as possible. [I tend to use the
>> engineering side of my brain, and in doing so, forget about
>> understandability to others] Also, if anyone has designs they would like
>> feedback on, I would be glad to oblige. If anyone would like to revamp my
>> designs they are welcome to, provided they send me a copy of the final
>> draft.)
>>
>> ~Matt Gallagher, your friendly teenage smith :)
>> ______________________________________________________________
>> TheForge mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TheForge at mailman.qth.net
>>
>> TheForge mail list group photo site is
>> http://www.photoworks.com
>> Login: blacksmithblacksmith at hotmail.com
>> Password: anvil
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>