[TheForge] Hello

[Ron Childers]

"Best of the Hammer", Vol III. All you want to know about armor  

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Kim George
Sent: Thursday, May 06, 2010 9:57 AM
To: Blacksmithing List Sponsored by ABANA
Subject: Re: [TheForge] Hello

I would suggest going to the library and look up armor gauntlets. That
would give you pictures and descriptions. I'm sure that is the basis
behind what you're wanting to make.

On 5/6/10, Ben Barrett <ben at nw-arts.com> wrote:
> Cool :)  I'd suggest starting with a model; figuring out exactly, or
nearly,
> what we want to do, but using a variety of different materials or even
> sizes, will help a lot.  For example, cardboard and tape or glue can help
> make a mock-up easier to produce and refine...  or sculpey clay...  then,
as
> we narrow down the parameters of our goal, transferring to a different
> medium or size can be easier.  For example, I can't say whether you should
> form sheet metal or cut lengths of tubing or pipe... 'it depends' would be
> the short answer.  What do you want to do with it, what sort of metal
glove?
>
> Some old curmudgeon who meant a lot to me, told me to go make a few
thousand
> of what I asked him about... anyway, I am also fairly new to the
> metalworking potentials, and there's a LOT to learn.  But, one step at a
> time... so maybe try one with whatever you can get your hands on.
Research
> around your community for places that can offer a safe and useful setting
> for you to learn, whether it is formalized or not, if you can do the
> homework the crucial bits are well-documented and so much of the rest
comes
> from experience, trying.
>
> Well, ramble I may, but to answer your question:  foil.  If you want to
> most-immediately make a metal glove, grab some tin-or-aluminum foil and
form
> it around your hand.  There you go... then you can work up to sheet
metal...
> or start thicker and forge down some bar stock, real blacksmithing ;)
>  Either way, I assure you a great time if you stick with it.  Then again,
> most of the other folks here have way better advice than me, but I'll
still
> speak up.  Thanks for asking :)
>
> cheerio,
>
> Ben
>
>
> On Thu, May 6, 2010 at 1:22 AM, Eduardo Garcia G.
> <eduardojgg0 at gmail.com>wrote:
>
>> Hi, I just want to know how to make a metal glove. I am new to this, I
>> dont
>> know where to start.. I need step by step and which materials I need to
>> build a glove of metal, like Iron Man's.
>>
>> I'm 19yo.
>>
>> Thanks!
>> ______________________________________________________________
>> TheForge mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/theforge
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:TheForge at mailman.qth.net
>>
>> TheForge mail list group photo site is
>> http://www.photoaccess.com
>> Login: blacksmithblacksmith at hotmail.com
>> Password: anvil
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


-- 
Kim George

"Why for you try to bury me in cold,cold ground?"
     Taz
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoaccess.com
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

 
 
****************************************************************************
********
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer
viruses.
****************************************************************************
********





 
 
************************************************************************************
This footnote confirms that this email message has been scanned by
PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses.
************************************************************************************