[TheForge] Ironworkers

[Jay Hayes]

I have a 42 ton Unihydro. It is one of the most used tools in the shop. 
It will shear 3/8 plate x 14", 3/4 round &sq bar, 3"x3"x5/16 angle; 
punch up to a 1-3/8 round hole or 1" square hole. It will also bend 1/4 
x 9", cut a 4" x 4" 90degree corner notch in 1/4 plate or angle, punch 
oblong and rectangular holes, notch pipe, swedge, flatten, rivet, stamp, 
and emboss. I even forge weld with it. It is a real money maker and time 
saver. Once you get one you won't know how you ever lived without it.

Jay

Cindy and James wrote:
> Do any of you guys use an ironworker in your shops?
> If so, what size machine and what brand?
> What is the most common use you have for it?
>
> James
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 8.5.439 / Virus Database: 271.1.1/2988 - Release Date: 07/07/10 18:38:00
>
>