[TheForge] Bull Air Hammer Oil

[Bruce Freeman]

McMaster lists oilers with polycarbonate bowls here:
http://www.mcmaster.com/#compressed-air-oilers/=aakr2c
where it says they take VG32 oil:  (see
http://www.hydrosafe.com/products/isovg32.htm)
which they say they list on this page (but I can't figure which they mean):
http://www.mcmaster.com/#vegetable-lubricants/=aakrsw
None of these is less than SAE 10W.


On Fri, Dec 24, 2010 at 12:27 PM, Ron Swisher <rwswisher1 at verizon.net> wrote:
> I have a Wlikerson dryer/reg/oiler setup to my Bull Air Hammer.  I need some SAE 5 nondetergent, light machine oil that has no phosphate ester or diester in it.  I have been unable to locate oil that is suitable.  What are you guys using?
>
> Thanks in advance,
> MERRY CHRISTMAS
> Ron
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoworks.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>



-- 
Bruce
NJ