[TheForge] More on knife gluing

[James Davis]

try this link


Jim Davis
 
Be who you are and say what you feel...Because those that matter, don't mind, and those that mind, don't matter! 







 

> From: dantull at numail.org
> To: theforge at mailman.qth.net
> Date: Mon, 23 Aug 2010 16:41:42 -0400
> Subject: Re: [TheForge] More on knife gluing
> 
> Steve,
> "Page not found"
> 
> ----- Original Message ----- 
> From: "Steve Bloom" <smith at blacksmithing.org>
> To: "Blacksmithing List Sponsored by ABANA" <theforge at mailman.qth.net>
> Sent: Monday, August 23, 2010 4:10 PM
> Subject: Re: [TheForge] More on knife gluing
> 
> 
> > At 03:49 PM 8/23/2010, you wrote:
> >> The pieces are slowly coming together, though- my goal is to make a 
> >> certain
> >>kind of knife using only glue, without visible rivets-
> >
> > Blind pins - drill holes in tang, fit a side - mark the holes. Glue
> > other side in place. Drill rivet size holes in the wood - DO NOT go
> > all the way thru. Make short pins, pointy on both ends, short enough
> > so that ~ 40% of the length extends above the tang when you shove
> > them in the holes. Drill the other side on the marks - just that 40%
> > or so. You may need to use a slightly larger bit that the pins (say
> > 0.125 pins, then a #30 bit). A touch deeper than needed is better
> > than too short. Smear glue over the side and pins and press into
> > place. As an example of what it looks like see:
> > http://www.ironflower.com/blades/images/J006.jpg  http://www.ironflower.com/blades/images/J006.jpg
> >
> >
> > Steve
> >
> > ______________________________________________________________
> > TheForge mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/theforge
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:TheForge at mailman.qth.net
> >
> > TheForge mail list group photo site is
> > http://www.photoaccess.com
> > Login: blacksmithblacksmith at hotmail.com
> > Password: anvil
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > 
> 
> 
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html