[TheForge] Kalamazoo Grinder

[bistline at md.metrocast.net]

Budget.....
-----Original Message-----
From: "Mark A. Pesetsky" <pesetsky at princeton.edu>
Date: Mon, 26 Apr 2010 19:39:51 
To: <bistline at md.metrocast.net>; Blacksmithing List Sponsored by ABANA<theforge at mailman.qth.net>
Subject: RE: [TheForge] Kalamazoo Grinder

I'd do a 2X72 if it is at all possible...
 
Mark

________________________________

From: theforge-bounces at mailman.qth.net on behalf of bistline at md.metrocast.net
Sent: Mon 4/26/2010 7:09 PM
To: theforge at mailman.qth.net
Subject: [TheForge] Kalamazoo Grinder



After several years of putting a 4in grinder in the vise I've decided it might be a bit safer & more efficent to have a belt grinder.  I have my eye on the 2FSM 2x48 grinder.  Anyone used or have one? Opinions on the machine?
______________________________________________________________
TheForge mailing list
Home: http://mailman.qth.net/mailman/listinfo/theforge
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:TheForge at mailman.qth.net

TheForge mail list group photo site is
http://www.photoaccess.com <http://www.photoaccess.com/> 
Login: blacksmithblacksmith at hotmail.com
Password: anvil

This list hosted by: http://www.qsl.net <http://www.qsl.net/> 
Please help support this email list: http://www.qsl.net/donate.html