[TheForge] forging contest
Zahn
sussexiron at hotmail.com
Wed Mar 4 20:55:49 EST 2009
I always like bottle openers and corkscrews. They can be judged on functionality and ergonomics.
> From: blcksmth at wcnet.org
> To: theforge at mailman.qth.net
> Date: Wed, 4 Mar 2009 12:09:26 -0500
> Subject: Re: [TheForge] forging contest
>
> This is one I used several years ago at our local hammer-in. I
> prepared several pieces of 1" round cut 1.27" (I believe)long. This makes
> each piece 1 cubic inch in volume. The assigned task was to hammer each
> piece into a cube as accurately as possible. The only tools allowed were
> hammer and tongs and a pencil or some other marking device - no other
> measuring devices allowed. My intent with the marking device was that they
> would set the round on end at the corner of the anvil and mark a 1 inch
> square at the corner but no one used it - they just started hammering. I was
> not concerned about being exactly 1" cubed as much as the cube having equal
> sides and square corners.
>
> Be prepared for judging with calipers and a square. To determine the
> winner the final 2 were checked with a square and calipers and it was not an
> easy task to eliminate one of them to second place. As I remember the winner
> was within about .030" from having equal sides and very little out of
> square.
>
> Good luck.
>
>
> Bob Willman
> Bowling Green, Ohio
> The Eagle's Anvil
> WB8NQW
>
> -----Original Message-----
> From: theforge-bounces at mailman.qth.net
> [mailto:theforge-bounces at mailman.qth.net] On Behalf Of dan tull
> Sent: Tuesday, March 03, 2009 11:57 PM
> To: theforge at mailman.qth.net; The_Anvil at yahoogroups.com
> Subject: [TheForge] forging contest
>
> Trying to come up w/ a contest for a conference. Needs to be less than 30
> mins.,and more objective than subjective. All skill levels. Forge welded
> rings, nails, RR spikes, and just plain drawing out for length have been
> done in the past. What do you think could be done w/ a min. of special
> tools?
>
>
> dan tull
> Georgia
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
_________________________________________________________________
Express your personality in color! Preview and select themes for Hotmail®.
http://www.windowslive-hotmail.com/LearnMore/personalize.aspx?ocid=TXT_MSGTX_WL_HM_express_032009#colortheme
More information about the TheForge
mailing list