[TheForge] Big Jig Saw Puzzle

[Peter Fels & Phoebe Palmer]

Andy Gladish wrote:
> On Tue, 01 Dec 2009 16:28:59 -0800, Bob Ehrenberger  
> <eforge at centurytel.net> wrote:
> 
>> Could the scraps from a Beverly shear be
>> reconstructed?
I imagine you could anneal, slap them flat and lay them out. Then shrink 
and stretch to offset distortion and weld it all back together.
Then you could forge or grind the welds flat, trace your pattern and cut 
it all out with the bev shear again.
> 
> Most definitely.
> Put them in the scrap bin and they'll be melted down and live happily ever  
> after as the next cool thing!
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
> 
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>