[TheForge] Stempeling info needed

[Bob Ehrenberger]

Jay,

Thanks for the suggestion,  I got a lot more hits on stippling.   It seems 
to be mainly a decorative technique.

Robert Ehrenberger
Shelbyville, Mo.
eforge at centurytel.net



----- Original Message ----- 
From: "Jay Hayes" <xmas4lites at earthlink.net>
To: "Bob Ehrenberger" <eforge at centurytel.net>; "Blacksmithing List Sponsored 
by ABANA" <theforge at mailman.qth.net>
Sent: Thursday, April 23, 2009 11:42 PM
Subject: Re: [TheForge] Stempeling info needed


Bob,
Another term I have seen used is "stippling."

Jay

Bob Ehrenberger wrote:
> While doing some repair work on my power hammer yesterday I was concerned
> about the loose fit of a couple parts that I needed to weld.  Being that 
> the
> positioning of these parts is critical to the opperation of the hammer I
> didn't want to leave the alignment to chance.  So I stempeled the inner 
> part
> to tighten up the fit. It worked very well and the parts had to be driven
> together which removed any doubt about the positioning.
>
> I was talking to friend about the project later and was surprised to find
> out that he had never heard of stempeling. So last night I spent quite a 
> bit
> of time searching the web for more information on stempeling.  To my
> surprise I didn't find anything on it.  The closest I came was a site in 
> the
> Neatherlands where they were doing decorative stamping. It thurns out that
> stempel is the Duch word for stamp and almost every link took me to a 
> sites
> in the Netherlands.
>
> So do any of you know of a site that talks about using a series of punch
> marks to tighten up the fit on parts?  I was under the impression that it
> was a common practice in gunsmithing.  Do I have the right word for the
> process?  Maybe it is known by something else.
>
> My project is done, but I would like more information on the process for
> future use.
>
> Robert Ehrenberger
> Shelbyville, Mo.
> eforge at centurytel.net
>
>
> ______________________________________________________________
> TheForge mailing list
> Home: http://mailman.qth.net/mailman/listinfo/theforge
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:TheForge at mailman.qth.net
>
> TheForge mail list group photo site is
> http://www.photoaccess.com
> Login: blacksmithblacksmith at hotmail.com
> Password: anvil
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>



--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.238 / Virus Database: 270.12.3/2076 - Release Date: 04/23/09 
06:30:00