[TheForge] coal or charcoal

Peter Hirst saltydog335 at aol.com
Thu Jun 12 19:39:11 EDT 2008


Dave:  I'm not looking at biodiesel yet:  the process is too complex, 
although I am fairly sure it would work.  More precisely, I have looked at 
it and determined that its too much to take on for the volume I need: 
couple gallons a week

I am looking at filtered waste veggie oil -- what the Greasecar  runs on --  
first,  I just need to determine whether the heavy stuff in wvo will tend to 
polymerize , or just plain thicken like like paraffin oil, which is what 
blocks tubular wicks in center draft lamps.

Keziah
----- Original Message ----- 
From: "David Childress" <trollkeep at gmail.com>
To: "Blacksmithing List Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Thursday, June 12, 2008 1:01 PM
Subject: Re: [TheForge] coal or charcoal


> Peter sounds like what you need if the process for making biodeaeil
> from used cooking oil.  This is on my list of thing to do but it has
> not made the top yet.
>
> David Childress
>
> On 6/12/08, Peter Hirst <saltydog335 at aol.com> wrote:
>> Andrew wrote:
>>
>> "D00d, ANY oil will work in a wicked lamp"
>>
>> Not exactly.  In my historic shop, I want to use Aladdin mantle lamps --
>> because they produce real light, about 60 watt equivalent.  I can tell 
>> you
>> from experience that they and other center draft lamps will clog if the
>> right fuel is not used.  I worked as the lamp guy in an old school 
>> general
>> store for a year, and saw any number of Alladins, Rayos and similar with
>> wicks that looked like they had been dipped in epoxy.  For technical 
>> reasons
>> that I can explain if you like, the denser, heavier compounds in certain
>> fuels build up in these wicks and eventually prevent the capillary action
>> that they rely on from drawing any more oil.  Alladin speciies not using
>> "smokeless, odorless" lamp oil, for example, because of its paraffin
>> content, recommending only kerosene.  Which is in fact smokelss and 
>> odorless
>> in a properly tuned center draft lamp.  I am currently working on
>> formulation of a recycled veggie based fuel that will not clog a center
>> draft wick.  I'll let you know how it turns out. So far I can tell you, 
>> it
>> has to be mechanically filtered pretty fine.
>>
>>
>> Keziah
>> _______________________________________________
>> Manage membership or unsubscribe at:
>> http://mailman.qth.net/mailman/listinfo/theforge
>> theforge mail list group photo site is
>> http://www.photoaccess.com
>> Login:  blacksmithblacksmith at hotmail.com
>> password:  anvil
>> ___________
>>
>>
>>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
> 



More information about the TheForge mailing list