[TheForge] Torch, Propane

[Mitchell P Widham]

Ron,

I am confused, are you using oxygen and propane?  


Mitch Widham
Operations Supervisor
Campus Safety Department
v: 7580
f: 4932
mitchell.widham at erau.edu
-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Ron Childers
Sent: Thursday, January 31, 2008 8:29 AM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] Torch, Propane

I've used the same acetylene regulator with propane for 15 years with no
problems- a #3 propane tip for the big Smith for serious cutting and the
small Victor as-is for localized heating, etc. Ron C

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Rich Maynard
Sent: Wednesday, January 30, 2008 7:55 PM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] Torch, Propane

Consider propane as a fuel. In the UK anyway it's cheaper and a bottle
lasts much longer as it comes as a pressurised andnot dissolved gas. I
can also get it much easier, and don't pay rental on the bottle. Unless
you want to weld it will do everything acetylene does but at a slightly
lower temperature.

You will need a different regulator, hose and cutting / heating nozzles
for propane.

Richard Maynard - Artist Blacksmith
The Forge, Much Hadham, Hertfordshire SG10 6BS
 
rich at muchhadhamforge.co.uk
www.muchhadhamforge.co.uk


-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Lynn and Susan
Lang
Sent: 30 January 2008 15:26
To: theforge at mailman.qth.net
Subject: [TheForge] Torch, Propane


Hello
I am looking to purchase a torch set, for an occasional cutting task and
for localized heating of objects. What options, attributes or other
factors should I be considering?

Thank you
lynn

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




--
No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.19.16/1250 - Release Date:
29/01/2008 22:20


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________