[TheForge] Free the Stake!

[Dan Scheid]

If you can fit it in some bucket. I have use an electrolytic bath to free
bolts it might work. Just get it covered in water with a small amount of HC
acid add a SS plate and a 12 volt battery charger and wait it out a day or
two.
Dan Scheid
-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Peter Hirst
Sent: Friday, January 18, 2008 7:27 AM
To: Sponsored by ABANA
Subject: [TheForge] Free the Stake!

Years ago, I bought a big, beautiful stake anvil (about 100lb) and a big,
beautiful swage block (150 lb) as a single auction lot. They were sold
together because the stake anvil was mounted in the swage block, and the
auctioneer was not about to attempt to separate them. The bottom end of the
stake is about 2" square and was driven and no doubt rusted into the 2"
square in the block. Well, long story short, they are still a single unit,
although I have tried several times to separate them. I have got some use
out of them as they are, but each is limited somewhat by the arrangement,
and the time has come to separate them. This thing has been an albatross for
more years than I care to admit, and I would be eternally grateful for
information on how to end the madness.

PGH
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________


No virus found in this incoming message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.19.6/1229 - Release Date: 1/17/2008
11:12 AM
 

No virus found in this outgoing message.
Checked by AVG Free Edition. 
Version: 7.5.516 / Virus Database: 269.19.6/1231 - Release Date: 1/18/2008
11:55 AM