[TheForge] flues

[Rick Korinek]

I have used 12" dia spiral duct, galvanized.  It is 22 ga. If I recall
correctly.  This duct starts above a side draft hood.  It never gets hot
enough to affect the galvanized coating.  

Rick Korinek
Island City Forge
Minocqua, WI
islandcityforge.com
 
715/358-5060 shop/studio
715-892-7425 cell
-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of john ortery
Sent: Thursday, January 17, 2008 9:59 AM
To: theforge at mailman.qth.net
Subject: [TheForge] flues

It sounds like you also need to be thoughtfull of the buildings next
to you, top of the flue should be above highest roof line. of course
most of us don't have anybody that close as to block air flow, but we
do need to worry about clearing our own roof line. The inspector here
is talking about 12 inch flue which will be harder to find.        any
thoughts on what gauge for the flue pipe?
          Allen Ortery
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________