[TheForge] wire brush

[Rick Korinek]

Porter Cable made a paint remover/sander I bought long ago.  It used 7"
aluminum disks with carbide grit on the face.  It runs about 3600 rpm.  I am
using it with a wire wheel.  It works well, if a bit heavy.  Perhaps you
could find one on ebay.

Rick Korinek
Island City Forge
Minocqua, WI


-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Grant Marcoux
Sent: Tuesday, January 09, 2007 4:20 PM
To: Sponsored by ABANA
Subject: RE: [TheForge] wire brush

The best alternative is to use a sander/polisher vs. an angle grinder.  A
sander/polisher turns at about 3450 rpm, vs. an angle grinder at over 7500
rpm.  According to noted smith Bill Epps, the wire wheel was originally
intended for the slower tool and is not truly safe at angle grinder speeds.
I'm still looking for a sander polisher configured like an angle grinder.
Grant

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net]On Behalf Of Janet Rivera
Switzer
Sent: Tuesday, January 09, 2007 1:46 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] wire brush


Wire wheels terrify me so although I like the silvered effect a wheel gives,
I
don't do it. This discussion seems to offer the following safer options:

1. a flap wheel
2. some kind of speed control to plug a wire wheel into
3. a Harbor Freight tool, which I have not been able to find in the local
store

Are there any others?

Janet

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.410 / Virus Database: 268.16.7/620 - Release Date: 1/8/2007


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________