[TheForge] wire brush

[John Husvar]

On 1/9/07 7:25 AM, "PlumDon at aol.com" <PlumDon at aol.com> wrote:

> My wire wheel preference for the 4-1/2" grinder is about a 2-5/8" Twist  Knot
> Cup Brush in either .35mm or .50 mm wire. The .35 gives a slightly softer
> finish. Both of these give good scale removal and finish. Anything much larger
> causes too much wobble and danger on a 4-1/2" grinder. I generally get the
> Hawk  brand from MSCDirect.com.

While you're about it, talk to Tom Gardner at Ohio Brush
http://www.ohiobrush.com

Tom's good people and makes a good product. Most have probably bought his
brushes without knowing it. He supplies many repackagers and retail sellers.

Tell him John Husvar from rec.crafts.metalworking sent you and he'll be sure
to doub^H^H^H^H make you a good price. Well, if he'll talk to you at all. :)

Tom(nospam)@ohiobrush.com (Do the obvious)