[TheForge] Horizontal Band saw

Thu Feb 22 17:00:40 EST 2007

Thanks, Frosty.  Yes, MS Word is good.

Aubrey
awashington AT ou.edu

________________________________

From: theforge-bounces at mailman.qth.net on behalf of Jerry Frost
Sent: Thu 2/22/2007 3:57 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] Horizontal Band saw

Aubry:

I'll be happy to send you a copy of the page text off
list. Is MS Word .doc format okay?

Frosty
-------------------------------
If it ain't forged
it ain't real.
Wrought iron is.
The FrostWorks

Meadow Lakes, AK.

http://www.artmetalradio.com/

----- Original Message -----
From: "Washington, Aubrey O." <awashington at ou.edu>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Thursday, February 22, 2007 6:51 AM
Subject: RE: [TheForge] Horizontal Band saw

Interesting.  My office server won't let me open that
URL because of something to do with "weapons".  Hmm.

________________________________

From: theforge-bounces at mailman.qth.net on behalf of
Steve Smith
Sent: Wed 2/21/2007 7:50 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] Horizontal Band saw

Here is an excellent start:
http://www.tinyisland.com/4x6bsFAQ.html

Steve

Washington, Aubrey O. wrote:
> I've had a HF 4X6 horizontal-vertical bandsaw for a
> couple of years now.  I have a problem with the blade
> jumping off the wheels.  This seems to be worse when
> I'm using it in the vertical position.  Over the
> weekend I was trying to split 3/8" square (for a
> Friedrich cross), and I never got more than 1/4"
> before the blade would jump off.
>
> Now this is the first band saw I've ever owned or
> used, so I don't know jack about how to adjust it.  I
> tried a new (not expensive) blade, but that didn't
> help.  Pretty frustrating.
>
> Aubrey
>
> ________________________________
>
> From: theforge-bounces at mailman.qth.net on behalf of
> Jerry Frost
> Sent: Wed 2/21/2007 2:33 PM
> To: Sponsored by ABANA
> Subject: Re: [TheForge] Horizontal Band saw
>
>
>
> I used a 4" x 6" no name horizontal vertical bandsaw
> for about 20 years till it just plain wouldn't track
> and couldn't be adjusted about. In all that time I
> replaced the roller guides once but the bearings in
> the
> blade wheels finally went 4-5 years ago. It cost
> $79.00
> in the late 70's or early 80's I don't remember
> little
> details that far back. <grin>
>
> Now I have a Jet 7" x 12" horizontal vertical with
> coolant. Bought it for under a grand, just. Either
> work
> just fine though the Jet has more capacity and I
> expect
> it to last a little longer. Still if it falls short
> of
> the longevity of the closeout store el-cheapo bandsaw
> by a few years it'll still be worth more than it cost
> by many multiples.
>
> I'm less impressed with the coolant especially
> cutting
> new steel, on rusty or dirty steel it helps by
> washing
> some of the dirt and grit off. A little wire brush
> action is a good solution you say and I say use the
> brush inside a piece of pipe and we'll talk. <grin>
>
> The secrets are a solid machine with adjustable
> tracking, slow speed and a good blade. The blade is
> all
> important after the machine is squared up. The most
> important rule of thumb is the "three tooth rule"
> There
> should be three (3) teeth in the cut at all times.
> Fewer wears the blade quickly, often just stripping
> the
> teeth. More teeth will load up with cuttings, not
> only
> slowing the cutting down but generating excess heat
> which wears the blade out more quickly. The
> vari-tooth
> ( I think that's what they're called) work very well
> though you still need to make sure the coarse part of
> the blade isn't going to grab. At any rate you'll
> want
> to use Bi-metal blades in most situations. Some
> situations you'll want to keep cheap throw away
> blades
> around for are salvaged metal where you don't know
> the
> alloy and it's dirty, rusty and such.
>
> Next in importance is feed speed, slower is almost
> always better though not universally. Some alloys
> work
> harden very quickly so it's important to carry as
> much
> heat off in the cuttings as possible, hogging the
> feed
> and living with slightly off cuts may be a viable
> alternative in these cases.
>
> I really recommend a horizontal vertical bandsaw.
> Being
> able to use it in the vertical position in no way
> degrades it's performance as a cut off saw and being
> able to change plattens and cut curves, split stock,
> etc. is VERY handy.
>
> Frosty
> -------------------------------
> If it ain't forged
> it ain't real.
> Wrought iron is.
> The FrostWorks
>
> Meadow Lakes, AK.
>
> http://www.artmetalradio.com/
>
> From: "Lynn and Susan Lang" <langfarm at together.net>
>
>
>>Hello
>>
>>Need someone to tell me where to go.......To buy the
>>best power hacksaw
>>for my small operation; do I go with the Delta, Jet,
>>MSC or what?
>>
>>I am just one step above this being a hobby.
>>
>>Thank you
>>lynn
>>
>>
>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com <http://www.photoaccess.com/> 
> <http://www.photoaccess.com/>
> <http://www.photoaccess.com/>
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com <http://www.photoaccess.com/> 
> <http://www.photoaccess.com/>
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com <http://www.photoaccess.com/> 
<http://www.photoaccess.com/>
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________

--------------------------------------------------------------------------------

> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com <http://www.photoaccess.com/> 
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
>

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com <http://www.photoaccess.com/> 
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________