[TheForge] Speaking of sheet metal...

[Michael]

Welcome back Frosty

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Jerry Frost
Sent: Sunday, September 24, 2006 1:12 PM
To: Sponsored by ABANA
Subject: Re: [TheForge] Speaking of sheet metal...

Phlip:

I don't recall if you got a, "you don't need a brake 
for this," reply. If not, let me know I used to make 
pretty precise bends without a brake or doing a lot of 
hammering.

Frosty
-------------------------------
If it ain't forged
it ain't real.
Wrought iron is.
The FrostWorks

Meadow Lakes, AK.

http://www.artmetalradio.com/

----- Original Message ----- 
From: "Saint Phlip" <phlip at 99main.com>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Tuesday, September 19, 2006 5:27 AM
Subject: [TheForge] Speaking of sheet metal...


>I need to bend some sheet metal myself, but not only 
>do I not have a
> brake, I wouldn't know how to use one if I did ;-)
>
> What I need to do is to bend the bottom of a box out 
> of sheet. Was
> thinking of cutting out the corners (except for tabs 
> to lightly hold
> the thing together at the corners) then clamping the 
> metal between a
> couple of heavy metal bars, then hammering away. Need 
> a fairly crisp
> bend, about 90 degrees. Will this work? Anybody have 
> any other ideas?
>
> -- 
> Saint Phlip
>
> Heat it up
> Hit it hard
> Repent as necessary.
>
> Has anyone seen my temper?
> I seem to have misplaced it at Stalag XXXV....
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
> 

_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________