[TheForge] Gate question

[Darrell]

The railing specs apply to areas where you could fall if you fit through toe 
openings. I don't think they apply to ground level fences and gates.

Darrell

----- Original Message ----- 
From: "Larry Brown" <lp.brown at verizon.net>
To: "Bob Ehrenberger" <eforge at centurytel.net>; "Sponsored by ABANA" 
<theforge at mailman.qth.net>
Sent: Friday, June 16, 2006 4:29 PM
Subject: Re: [TheForge] Gate question


> If the house is past the construction phase, and no inspections need to be 
> done, I would build it to their specs and state it on the invoice. "Gate 
> fabricated to owners specification". If there is a problem you could 
> charge them to go back and sub divide it ;-)
>
> Larry Brown
>
>
>
> At 07:10 AM 6/16/2006 -0500, you wrote:
>>I have a customer that wants a decorative gate to hide a generater in 
>>their
>>court yard.
>>
>>They specified 6" spacing on the uprights.  Can I go with that or does it
>>have to be 4" like on a railing?
>>
>>I'm going to be at a reenactment for a couple days. Will catch up on
>>responses when I get back.
>>
>>Robert Ehrenberger
>>Shelbyville, Mo.
>>eforge at centurytel.net
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>