[TheForge] glass doors

Sat Jun 10 17:29:44 EDT 2006

when I slide the glass down the frame made by the 1/8 by 1/2 angle I simply 
cut a piece of the gray stove gasket rope that is round on the back side of 
the glass and under the angle,  it holds everything nice and tight tucked 
back in there.  They do make a gasket that is gutter shaped and you can wrap 
around the edge of the glass but that holds the glass back and away from the 
door frames and just does not look as tight and clean.

In the tourist / vacation valley that I live there are only two masons, both 
exclusively build Rumford of Rumford hybrid fireplaces,  this means the fire 
cannot be burned with the doors shut.  I do whatever the client or designer 
for architect  or builder wants and there are many options.  Most common is 
a metal curtain that is mounted to the back side of the top horizontal of 
the subframe.  My hinges are designed so the doors can be lifted off if one 
wishes or burned just swung open.

Another option is fixed screen panels that can be slid in when the glass is 
slid out.  I sandwich the screen between two pieces of 1/2 by 1/8th flat 
stock riveted to all four edges.

Yes,  double hinges can be built for glass and screens,  I have never  built 
this kind,  have looked closely at maybe four different versions that I have 
seen and must say I have never seen any of these that I thought came out 
nice, clean, and really looking right.....................just my opinion.

Hope this helps.

Roger

Ps.  if you google Rumford fireplace you will find the home page for Rumford 
with a link to photos of many hand made fireplace door sets.  I am not sure 
if they are still there but some of mine had ended up there as well.
----- Original Message ----- 
From: "Ralph Sproul" <brhlbsmt at mcttelecom.com>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Saturday, June 10, 2006 7:57 AM
Subject: RE: [TheForge] glass doors

>
>
> Hi Roger, Thanks for the three sided slide in info on the angles - I've
> seen this used on masonry furnace doors my buddy does. The sealing gasket
> was a mystery to me as it was all welted in rope - and this grey material
> you mention is something I'd like to know more about.
>
> When you say the grey colored gasket stuff is this something the glass
> supplier provides for you? or did you purchase this seperate from McMaster
> or another
> similar industrial supplier? or is this material a refractory supplier 
> that
> you use?
>
> If you have time, I know you've posted the three glass types for fire
> exposure before (but I'll be damned if I can find them).  Being as I'm 
> being
> asked to
> do one of these screen & glass combo covers, would you have that info 
> again
> on the glasses?
>
> Thanks for any info you've got as someone that's done over 30 of these 
> sure
> has a lot more knowledge than me attempting my first glass enclosure.
>
> I've also heard that using the same pintle with an L bracket hinge to the
> rear screen allows both door units to swing out and be inside each other
> when closed (screen in and glass out - then when open the glass is against
> the outer hearth/chimney, and the screen is in use or can be opened more
> than 90 degrees for ease of loading.  Is this how you approach this as 
> well?
>
> I remember you sent me some nice picture of the hinges you made - but it 
> was
> for one set of doors - what have you done for swinging both doors when
> requested?  Of have you done just screen or glass and not both?
>
>
>
> Ralph
>
> -----Original Message-----
> From: theforge-bounces at mailman.qth.net
> [mailto:theforge-bounces at mailman.qth.net]On Behalf Of roger olsen
> Sent: Friday, June 09, 2006 3:16 AM
> To: Sponsored by ABANA
> Subject: Re: [TheForge] glass doors
>
>
> I mount my glass behind the doors in a frame of 1/8th by 1/2 inch angle 
> that
> is welded to the back of the doors on the two sides and the bottom.  The
> glass is held tight by fireplace gasket material, the gray cloth stuff. 
> The
> glass just slides into the frame behind the doors and his held snug by the
> gasket fabric.  Works great,  I have built around 3 dozen fire door sets
> this way with never a problem.
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> ----- Original Message -----
> From: "paul" <forge at wi.rr.com>
> To: "Sponsored by ABANA" <theforge at mailman.qth.net>
> Sent: Thursday, June 08, 2006 6:13 PM
> Subject: Re: [TheForge] glass doors
>
>
>> Wayne Ackman wrote:
>>> I am finishing a set of fireplace doors,  I have the glass from the
>>> cutters and it sets in with about 1/4" space around all sides, a bit 
>>> more
>>> than I wanted but....  I am wondering about the best way to fix the 
>>> glass
>>> in the frame.  I could set straps across the corners and screw them on.
>>> Would allow the glass to be replaced if necessary,  but would detract
>>> from the design.  Or I could caulk it in, which would help with the 
>>> space
>>> between the glass and the frame,  but I don't know what the heat would 
>>> do
>>> to that.  Nothing good, that I can imagine.  I am not coming up with an
>>> idea that I like so was wondering if you all might...
>>>
>>> Wayne
>>> _______________________________________________
>>> Manage membership or unsubscribe at:
>>> http://mailman.qth.net/mailman/listinfo/theforge
>>> theforge mail list group photo site is
>>> http://www.photoaccess.com
>>> Login:  blacksmithblacksmith at hotmail.com
>>> password:  anvil
>>> ___________
>>>
>>>
>>>
>> Don't know if it helps, but stained glass pieces installed in lead
>> channels are locked in place with plaster of Paris. Might be a solution
>> for your application. High temp silicones sounds like a good idea, but
>> they are so PERMANENT. Better have every thing in place... the first 
>> time.
>> Seems as if the largest problem would be the different expansion ratios 
>> of
>> glass and metal. Some means of allowing for expansion would seem like a
>> good idea...
>> Paul Sperbeck
>> _______________________________________________
>> Manage membership or unsubscribe at:
>> http://mailman.qth.net/mailman/listinfo/theforge
>> theforge mail list group photo site is
>> http://www.photoaccess.com
>> Login:  blacksmithblacksmith at hotmail.com
>> password:  anvil
>> ___________
>>
>>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>
>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
> 