[TheForge] Candle cups

[Walter Mullett]

I guess I could silver-soldier easier than braze it.

I've never worked with brass so I guess I will have to play around a little
first.  I did see that Jock did a demo on i-forge a couple of years ok so
I've looked at that. 

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Ron Childers
Sent: Tuesday, January 10, 2006 2:22 PM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] Candle cups

You can "braze" copper with copper house wiring or phoz-copper. Use flux
coated brazing rod on brass. Both work well but get some experience on scrap
before you try it on your pretty project. Ron C

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Washington, Aubrey O.
Sent: Tuesday, January 10, 2006 2:00 PM
To: Sponsored by ABANA
Subject: RE: [TheForge] Candle cups

Walt,
I've done that with both steel and copper and it worked fine.  I've never
tried brass, but I don't know why it wouldn't work as long as it is well
annealed while you do the flaring.  Of course your brazing wire would need
to have a lower melting point than the brass.  I might try soldering since
the joint won't show (I assume).
 
Aubrey

________________________________

From: theforge-bounces at mailman.qth.net on behalf of Walter Mullett
Sent: Tue 1/10/2006 12:52 PM
To: 'Sponsored by ABANA'
Subject: [TheForge] Candle cups



I'm planning a chandelier and thinking of using brass wire wraps, brass
candle cups and wax catchers to brighten it up.  I've looked on-line for
cast cups but I've not found what I would like.  I'm now looking at using
brass tubing (7/8"x.040); flaring one end open and brazing the tube directly
to the catchers.

Have any of you done something similar?

I'm looking at Metalliferous as a supplier.

Walt
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________