[TheForge] Powermig 110

[Grant Marcoux]

Amen

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net]On Behalf Of Ron Childers
Sent: Tuesday, August 22, 2006 12:42 PM
To: 'Sponsored by ABANA'
Subject: RE: [TheForge] Powermig 110


If tha fails you may need a new liner

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Grant Marcoux
Sent: Tuesday, August 22, 2006 3:34 PM
To: Sponsored by ABANA
Subject: RE: [TheForge] Powermig 110

Chris:  You machine takes typically .025, .035 or.045 wire.  The jamming can
be cured by:

1. Removing wire tip at end of gun
2. Try getting wire to feed by activating gun.
3. If this does not work, try cutting the wire at the spool, locking onto
the end of the wire that is sticking out of the gun with vise grips, laying
the gun cable straight out, and pulling the wire through and out.  Then
activate motor and feed in the wire at the spool, AFTER checking the spool
for free travel and checking the function of the motor drive.

Grant
-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net]On Behalf Of crimsonkil
Sent: Tuesday, August 22, 2006 12:05 PM
To: theforge at mailman.qth.net
Subject: [TheForge] Powermig 110



                                 Hi Folks,

           Just bought a used mig for cheap.  The wire won't feed, think
   that there is a kink in the wire inside the hose.  The motor turns and
   pushes wire, but it is jammed inside and won't advance.  My questions
   are these:  One, what size wire does the Powermig 110 take?  And, does
               anyone have suggestions on how to remedy this?


                                  Thanks,


                                  Chris K.

   It is I who formed the blacksmith,
   who fans the flame into a fire and
   fashions a weapon fit for it's work.
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.5/425 - Release Date: 8/22/2006


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________




--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.405 / Virus Database: 268.11.5/425 - Release Date: 8/22/2006