[TheForge] Step Pulley

[Larry Brown]

The previous owner broke the edge off the largest pulley. At this point the 
bore is good if I had to I just wouldn't have the slowest speed. If I can't 
find one I'm probably going to try to buy one with a 3/4 shaft hole and 
hope it has enough meat to drill it out. I can't find one with a smooth 
bore so if I go that route I hope it works
Larry


At 05:01 PM 11/24/2005 -0500, you wrote:
>         Larry, Is it old enough that it has enough meat in it to turn out 
> and press
>in a bushing?  I've done that on old pulleys that aren't paper thin.  Walker
>Turner should be 40's to 50's and be heavy enough to try that........or is
>this pulley splined for the quill?
>
>If no one has one - send me a picture, I've just been to a great machine
>tool place I have to go back to, and also found two more we're going to in
>the next couple weeks.  I'll see if someone has what you want if you come up
>short.
>
>Ralph
>
>-----Original Message-----
>From: theforge-bounces at mailman.qth.net
>[mailto:theforge-bounces at mailman.qth.net]On Behalf Of Larry Brown
>Sent: Thursday, November 24, 2005 1:52 PM
>To: theforge at mailman.qth.net
>Subject: [TheForge] Step Pulley
>
>
>Hi
>   I need to replace the step pulley on an old Walker Turner drill press its
>a 2, 3, 4, 5 pulley with a 7/8 shaft size(Not the motor end). I've searched
>MSC, Grainger, Mc Master and others. Any one know of other sources I might
>be able to try?
>
>Thanks
>Larry Brown
>
>_______________________________________________
>Manage membership or unsubscribe at:
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  blacksmithblacksmith at hotmail.com
>password:  anvil
>___________
>
>
>
>_______________________________________________
>Manage membership or unsubscribe at:
>http://mailman.qth.net/mailman/listinfo/theforge
>theforge mail list group photo site is
>http://www.photoaccess.com
>Login:  blacksmithblacksmith at hotmail.com
>password:  anvil
>___________