[TheForge] what size cylinder?

[Dan Scheid]

Phil my hammer is 4'X4"X12" weight is 55# and I'm running it on a 2"
cylinders and get about 180-200 bpm on a cheep compressor.  So 2" will lift
it remember that a larger cylinder will only work if you have a compressor
that will run it.
Dan Scheid

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Phil
Sent: Monday, May 23, 2005 6:46 AM
To: Sponsored by ABANA
Subject: [TheForge] what size cylinder?

I'm thinking about building another air hammer.  On my
first one I used 3"X3"X10" as the hammer head.  This
time I think I'll use 4"X4X10".  What size cylinder
should I use?

Thanks

Phil Rosche


		
__________________________________ 
Yahoo! Mail Mobile 
Take Yahoo! Mail with you! Check email on your mobile phone. 
http://mobile.yahoo.com/learn/mail 
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________