[TheForge] Removing Galvanizing (was: Posthumous Demonstration by Jim Paw-Paw Wilson)

[Jim Pigott]

Thank you for this information.
Jim

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Bruce Freeman
Sent: Tuesday, June 07, 2005 9:22 AM
To: theforge at mailman.qth.net
Subject: [TheForge] Removing Galvanizing (was: Posthumous Demonstration by
Jim Paw-Paw Wilson)

Jim Wilson's death is as tragic as anything I've recently heard about.  I'll
miss him on this and other forums.

The worst of it is that it was entirely avoidable.  All metalworkers should
know that there is a simple, cheap, safe (to the user) way of removing zinc
from steel:  Pickle it off with muriatic acid.  

The acid need not be concentrated.  Dilute acid will work as well and will
attack the iron more slowly after the zinc is gone.   (Always add acid to
water, not water to acid.)   Hydrogen gas WILL be given off, so DO THIS
OUTSIDE.  Pull the parts out of the pickling bath when the zinc is gone, and
before the iron is much attacked.  This means, don't go away and leave them
- watch the process.  

The resulting liquid will be toxic with zinc, so keep it and reuse it for
the same purpose, adding small amounts of muriatic acid as needed.
Eventually, the concentration of zinc chloride (sometimes called "killed
acid" - but there's confusion in such common names) in the solution will be
high enough that the liquid might be useful as a soldering or brazing flux.
Remember, though, that use of zinc chloride as a flux will result in zinc
fumes.  So use very good ventillation and don't breathe those fumes.

If you must dispose of this material, DON'T dump it down the drain.  Consult
local disposal authorities.  It may be a nuisance, but you don't want you
dog to eat it, you don't want it in the water you drink or the fish you pull
from a local stream.  Where I live, I have to make an appointment, but it
costs me nothing to get rid of such wastes.

Bruce
NJ


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________