[TheForge] which Stainless rod for welding cast iron?

[Ron Childers]

Jeff, the local guys don't have them? Try weldingsupply.com

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Barking Crow
Sent: Monday, February 28, 2005 6:36 AM
To: artgawk at thegrid.net; Sponsored by ABANA
Subject: [TheForge] which Stainless rod for welding cast iron?

Good morning,

I do a lot of bench vise repair and I use a lot of 55% Nickel rods which
works well, but this morning I need to repair a ring that sits under the
base of a Chinese bench vise and receives the two tighteners that hold the
swiveling vise to the base.  I'm very low on the 55% NI rods and want to try
it with the stainless rods but can't remember which stainless rods I need to
weld cast iron.  I had it on my hard drive probably a half dozen places but
a recent crash dumped all of MY stuff.  My wife explained why but we
couldn't afford to back up my stuff, but it was over my head.

Also, can anyone recommend a reasonable place on the net to buy the 55 and
99% Nickel rods.  I saw a site recently but they wanted almost $20 for four
(4) rods.  I bought a lot of them when Home Depot and Lowes had em, but
they've quit carrying em.

Thanks again,  Jeff Valentine


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________