[TheForge] Chisels now Library

[Steve Smith]

I've always had great results with these guys:
http://www.newegg.com

Steve

Chris Kilpatrick wrote:

> I just bought my DVD burner and cd burner for $50 at best buy. 
>      I also made a persianesque knife with an all brass handle (Blacksmithing content).  And my anvil rings even though I have silcon under and around it and magnets under horn and heal.
> 
> -Chris K.
> 
> ----- Original Message -----
> From: "Dan Scheid" <damales at earthlink.net>
> To: "'Sponsored by ABANA'" <theforge at mailman.qth.net>
> Subject: RE: [TheForge] Chisels now Library
> Date: Sun, 20 Feb 2005 23:07:07 -0800
> 
> 
>>Are you trying to make DVD from the vhs? Or just make a copy of the DVD'S?
>>For making copies they now make DVD burns cheap under $500. Might find
>>something as low as $200. For transfer I just picked up a vid card for my
>>computer that should be able to do it was 250. Or there are captures cards
>>for less then 200. A DVD burner is about 100. So what I'm saying or asking
>>is why not do it yourself? The tools have become affordable
>>Dan Scheid
>>
>>
>>Unfortunately the library is still unavailable due to tech problems.
>>The UMBA board met today and want to solve the problem and get back in
>>operation as soon as possible.
>>We are looking for someplace to make reasonable DVD copies that will
>>continue to play.
>>Anyone have a suggestion as who can provide this service.
>>There are slightly over 100 titles so we can not order a large quantity
>>of each title as we are a non profit group.  Most average over 5 hours
>>long. If and when we are again operational I will spam the blacksmith
>>groups with ads looking to sell the DVDs.
>>We also used to offer VHS but means the DVDs quite working we cant make
>>VHS copies.
>>The very bad news is we have 1000 copies on hand that may or may not
>>play all the way through.
>>I can make you a good deal on them.
>>Roger R Degner
>>
>>
>>
>>-----Original Message-----
>>From: theforge-bounces at mailman.qth.net
>>[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Jim Pigott
>>Sent: Saturday, February 19, 2005 8:31 AM
>>To: 'Sponsored by ABANA'
>>Subject: RE: [TheForge] Chisels
>>
>>
>>Good deal, our group voted to purchase their whole library.
>>Thanks,
>>Jim
>>
>>-----Original Message-----
>>From: theforge-bounces at mailman.qth.net
>>[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Michael Horgan
>>Sent: Friday, February 18, 2005 10:00 PM
>>To: Sponsored by ABANA
>>Subject: Re: [TheForge] Chisels
>>
>>Get hold of Roger Degner and pick up a couple of the UMBA
>>Tapes/DVDs,   There are a couple of nice videos of George Dixon demos
>>where
>>he goes into making and using chisels and tooling for repussee ... looks
>>
>>like he mostly uses O-1 and S-1.
>>
>>At 01:33 PM 2/18/2005, you wrote:
>>
>>>Does any know of a source for information on making chisels? I 
>>>need to know which material is best for hot and cold chisels, 
>>>repousse' and chasing chisels and how to temper the ones that 
>>>need tempering. I would
>>
>>>like to do an article for our newsletter but am woefully ignorant 
>>>on this subject. Thanks for your help. Jim
>>>
>>>Jim Pigott
>>>
>>
>>Michael D. Horgan , lughaid at earthlink.net
>>http://members.aol.com/lughaid/ posting from
>>   A BRAZEN FORGERY
>>Blacksmithing and Metalwork
>>Claremont, Ca.
>>
>>
>>_______________________________________________
>>Manage membership or unsubscribe at:
>>http://mailman.qth.net/mailman/listinfo/theforge
>>theforge mail list group photo site is http://www.photoaccess.com
>>Login:  blacksmithblacksmith at hotmail.com
>>password:  anvil
>>___________
>>
>>
>>_______________________________________________
>>Manage membership or unsubscribe at:
>>http://mailman.qth.net/mailman/listinfo/theforge
>>theforge mail list group photo site is http://www.photoaccess.com
>>Login:  blacksmithblacksmith at hotmail.com
>>password:  anvil
>>___________
>>
>>
>>_______________________________________________
>>Manage membership or unsubscribe at:
>>http://mailman.qth.net/mailman/listinfo/theforge
>>theforge mail list group photo site is
>>http://www.photoaccess.com
>>Login:  blacksmithblacksmith at hotmail.com
>>password:  anvil
>>___________
>>
>>
>>
>>
>>_______________________________________________
>>Manage membership or unsubscribe at:
>>http://mailman.qth.net/mailman/listinfo/theforge
>>theforge mail list group photo site is
>>http://www.photoaccess.com
>>Login:  blacksmithblacksmith at hotmail.com
>>password:  anvil
>>___________
> 
> 
> 
> 
> It is I who formed the blacksmith, 
> who fans the flame into a fire and
> fashions a weapon fit for it's work.
>