[TheForge] Drill Press replace the chuck

[Darrell]

Is there a number on the ALBRECHT? Do you have a way to measure the diameter
of the hole at the top and the bottom? If you can, what are those dimensions
and how deep is the hole?
Darrell

http://www.machinemaster.com
----- Original Message ----- 
From: "Mark A. Pesetsky" <pesetsky at Princeton.EDU>
To: <artgawk at thegrid.net>; "'Sponsored by ABANA'" <theforge at mailman.qth.net>
Sent: Wednesday, October 20, 2004 7:30 AM
Subject: RE: [TheForge] Drill Press replace the chuck


>
>
>
> Mark:
> Just for giggles, open the old chuck up all the way and look up in there
> with a flashlite.
>  I ran into one that had a retaining screw in there that had to be
> removed before I could use wedges to remove the chuck.....things were
> pretty battered before I figured it out....Pete F
>
> I already have the chuck off...Now I need to get something (arbor/or
> adapter)to attach the ALBRECHT to the drill press..
> Thanks
> Mark
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>