[TheForge] Hydraulic Cements etc

[Ralph Sproul]

Hi Bill, I still kick myself on occasion on those cover
plates.........that's why I mentioned it.  :-)

I upgraded some Tig hoses and a couple torches, but never got the flex head.
I'd really like one of those - as I get tired of fighting the "memory" in
the hose all winter when the temps are lower in the shop.  I have gone to
making a rack that allows the tig to be hung in one loop instead of
three.....that's helped, but I still like the idea of a flex head.

Do you have that info?

If so, Thanks.  I'll order one.

Ralph

----- Original Message -----
From: "Woolley" <wjande at erols.com>
To: "Sponsored by ABANA" <theforge at mailman.qth.net>
Sent: Wednesday, November 10, 2004 9:32 PM
Subject: Re: [TheForge] Hydraulic Cements etc


>
>
> Ralph Sproul wrote:
>
> >
> >        Dont' forget to duct tape your escutcheon plates up on your posts
> >prior to pouring (unless you have two piece covers).
> >
>
> Ralph,
> Got stung on this once.  Once is usually enough to cure me. Did I say
> usually?  Good advise, thanks.  I remember that you recommended Rockit
>  in an old thread on this subject.  Also, did you ever buy that flex
> head tig torch?  I  went to a local welding supply recently to price
> them and they didn't show the type I use in the catalog.  I was going to
> send you the model number from the torch head so you would know exactly
> which one it is.  The flex heads they showed were a different animal so
> let me know if you need this info.
>
> Regards,
> Bill Woolley
>
>
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>
>