[TheForge] Possible return of Pure Iron to the USA

[Michael H. Murphy]

Geez, Dan, give the guy a break.  Haven't you ever mad a typo? :-)

Murf

> -----Original Message-----
> From: theforge-bounces at mailman.qth.net [mailto:theforge-
> bounces at mailman.qth.net] On Behalf Of Dan Tull
> Sent: Sunday, November 07, 2004 1:51 PM
> To: Sponsored by ABANA
> Subject: Re: [TheForge] Possible return of Pure Iron to the USA
> 
> Very ambitious!    1foot sq.?
> dan tull
> georgia
> abba, afc, S.C. psba, obg,sofa
> ----- Original Message -----
> From: "Schade" <schade at acegroup.cc>
> To: "Sponsored by ABANA" <theforge at mailman.qth.net>
> Sent: Sunday, November 07, 2004 8:12 AM
> Subject: Re: [TheForge] Possible return of Pure Iron to the USA
> 
> 
> > I've never tried 'pure iron'. I did try to buy some at LaCrosse a
> > couple of years ago but all that the guy had was like 1/8"x 3/4".
> > This size material is already pretty easy to forge.
> >
> > If the stuff is as easy to forge as everyone says you could save
> > yourself some inventory by only stocking larger sizes. They
> > could then be forged down for a project. It seems like 3/4"
> > square/round, 1/2"x1"flat, 1' square/round, would cover most small
> > shop purposes.
> >
> > Bob
> > ___
> >
> >
> >
> >
> > On Nov 6, 2004, at 5:50 PM, Mark Williams wrote:
> >
> >> I'm interested in square and round rod, but not in very large
> >> quantities. I'd like to learn more.
> >>
> >> Mark
> >> Snow Hill, Maryland
> >> ----- Original Message ----- From: "Rome Hutchings"
> >> <rome.hutchings at theprairieismygarden.com>
> >> To: <theforge at mailman.qth.net>
> >> Sent: Thursday, November 04, 2004 9:23 PM
> >> Subject: [TheForge] Possible return of Pure Iron to the USA
> >>
> >>
> >>
> >> Anyone who got their hands on this material knows how wonderful it was
> >> to work with.  But, just
> >> like many a good thing........the east coast importer stopped bring it
> >> to the USA.  While it is true
> >> that it was expensive, but the ease of working with it more than made
> >> up for the cost in reduced
> >> forging time.
> >>
> >> If there are enough people out there interested, the possibility of
> >> importing it are very good.  Right
> >> now I have standing pre-orders for 5,000 lbs.  What needs to happen is
> >> this number has to be more
> >> like 20,000 lbs in order to get a break on the shipping.
> >>
> >> So, if you are interested, please reply and pass this message on to
> >> others who might be interested.
> >>
> >> In the mean time, check out the link:  http://www.pureiron.com/
> >>
> >> Regards,
> >>
> >>
> >>
> >> Rome Hutchings
> >> The Prairie Forge
> >> 13633 Ferman Avenue NW
> >> Clearwater, MN 55320
> >> (763) 878-1694
> >> rome.hutchings at theprairieismygarden.com
> >> _______________________________________________
> >> Manage membership or unsubscribe at:
> >> http://mailman.qth.net/mailman/listinfo/theforge
> >> theforge mail list group photo site is
> >> http://www.photoaccess.com
> >> Login:  blacksmithblacksmith at hotmail.com
> >> password:  anvil
> >> ___________
> >>
> >>
> >> _______________________________________________
> >> Manage membership or unsubscribe at:
> >> http://mailman.qth.net/mailman/listinfo/theforge
> >> theforge mail list group photo site is
> >> http://www.photoaccess.com
> >> Login:  blacksmithblacksmith at hotmail.com
> >> password:  anvil
> >> ___________
> >>
> >>
> >>
> >
> > _______________________________________________
> > Manage membership or unsubscribe at:
> > http://mailman.qth.net/mailman/listinfo/theforge
> > theforge mail list group photo site is
> > http://www.photoaccess.com
> > Login:  blacksmithblacksmith at hotmail.com
> > password:  anvil
> > ___________
> >
> >
> >
> 
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
>