[TheForge] Free bandsaw blades

[John Chobrda]

Steve
	Band saw blades come in large rolls, are cut to length and welded.
Why don't you cut yours to length and weld? It will save you from buying
new. If you can't do this yourself I'm sure there is a local machine shop
that will do it for a small fee (less than new blades).

John C.

-----Original Message-----
From: theforge-bounces at mailman.qth.net
[mailto:theforge-bounces at mailman.qth.net] On Behalf Of Steve Smith
Sent: Monday, June 28, 2004 8:04 AM
To: Sponsored by ABANA
Subject: [TheForge] Free bandsaw blades

I have a handfull of 7' 9" bandsaw blades (such as a horizontal bandsaw 
uses). Most of them are 1/2", 0.025, 14tpi. If they fit your saw, you 
may have them (for shipping if needed).

I bought my saw used with a bunch of blades in the bottom. Finally came 
time to change the blade and I find that none of them actually fit my 
saw. Mine uses blades a few inches shorter.

Let me know,
Steve Smith
Brownfield, Maine
(207)935-3878


_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________