[TheForge] Basis smithing exercises(Going OT)

Sun Jul 4 11:38:32 EDT 2004

Murphy's Law: "In order properly to operate a piece of machinery, the
operator must be smarter than the machine."

This is why Texas Aggies have trouble with doors.

Murf

> -----Original Message-----
> From: theforge-bounces at mailman.qth.net [mailto:theforge-
> bounces at mailman.qth.net] On Behalf Of Robert Morris
> Sent: Saturday, July 03, 2004 2:58 PM
> To: theforge at mailman.qth.net
> Subject: RE: [TheForge] Basis smithing exercises...
> 
> Thanks Murph. Maybe I'll learn how to work this machine in spit of myself.
> Bob M.
> 
> 
> >From: "Michael H. Murphy" <blacksmith at comcast.net>
> >Reply-To: Sponsored by ABANA <theforge at mailman.qth.net>
> >To: "'Sponsored by ABANA'" <theforge at mailman.qth.net>
> >Subject: RE: [TheForge] Basis smithing exercises...
> >Date: Fri, 2 Jul 2004 18:17:58 -0400
> >
> >Bob,
> >
> >Several ways to do this:
> >
> >1.  Check your print setup to see if it has an option to "Fit to Page,"
> or
> >possibly something like zoom in or out.
> >
> >2.  Save the files onto your hard drive, then resize them with a graphics
> >program.  Photo Shop, Paint Shop, Draw Plus, or any of about a zillion
> >others.  Then print them out.
> >
> >3.  Save the files onto your hard drive, the insert them into a word
> >processor like WordPerfect, size them you way you want, then print out
> the
> >document.
> >
> >The files vary in size as high as 1250 x 2050 pixels, so trying to print
> >them actual size is going to take a good-sized plotter.
> >
> >Murf
> >
> >
> >
> > > -----Original Message-----
> > > From: theforge-bounces at mailman.qth.net [mailto:theforge-
> > > bounces at mailman.qth.net] On Behalf Of Robert Morris
> > > Sent: Friday, July 02, 2004 8:46 AM
> > > To: theforge at mailman.qth.net
> > > Subject: RE: [TheForge] Basis smithing exercises...
> > >
> > > Andy,
> > > Is there another way that you can send these drawings? I tried to
> print
> > > them
> > > but I can only get about 1/4 of 1 page and it stops.
> > > Thanks,
> > > Bob M.
> > >
> > >
> > > >From: Andy Vida <osan at netlabs.net>
> > > >Reply-To: Sponsored by ABANA <theforge at mailman.qth.net>
> > > >To: "blacksmiths at yahoogroups.com" <blacksmiths at yahoogroups.com>,4g
> > > ><theforge at mailman.qth.net>,"knife-list at kepler-eng.com"
> > > ><knife-list at kepler-eng.com>,"artmetal at wugate.wustl.edu"
> > > ><artmetal at wugate.wustl.edu>
> > > >Subject: [TheForge] Basis smithing exercises...
> > > >Date: Tue, 29 Jun 2004 10:02:45 -0700
> > > >
> > > >Pardon my burning brain, but I forgot which list this came up on, so
> > > >I'm sending the link to everyone.  You many send all mail bombs to me
> > > >in Vancouver WA.  You're welcome.
> > > >
> > > >OK, the four basic blacksmithing exercises are now at the following
> > > >links:
> > > >
> > > >	http://netlabs.net/~osan/Documents/ex1.jpg
> > > >	http://netlabs.net/~osan/Documents/ex2.jpg
> > > >	http://netlabs.net/~osan/Documents/ex3.jpg
> > > >	http://netlabs.net/~osan/Documents/ex4.jpg
> > > >
> > > >They look simple and in fact they are VERY simple.  But doing them
> > > >correctly AND to dimension isn't nearly as easy as it may appear.
> > > >
> > > >Spend a few days doing nothing but these exercises and you will gain
> > > >something in hammer control and your knowledge of volumes.  In order
> > > >for the exercises to work, you MUST adopt an attitude of pushing the
> > > >limits of your control, which in turn requires an adjustment of your
> > > >standards (maybe).  Peter Ross had me up on the rack for an entire
> > > >week, stretching me for all I was worth.  I came away from the class
> > > >with a fundamentally altered perception of what I could do and what
> > > >it meant to be a real blacksmith working to specifications.  If you
> > > >are patient with yourself and the exercises, they may bring you to a
> > > >place you never thought you'd come to, or even that it existed in
> > > >terms of what is possible in precision with nothing more than hand,
> > > >hammer, anvil and a pair of eyes.
> > > >
> > > >Do each step as if it was the ultimate goal.  That is, when you
> finish
> > > >a step, all planes whould be flat and at the right angles; all edges
> > > >should be dead straight, and the piece should look FINISHED.  Then
> > > >move on to the next step and not before.  Peter Ross was emphatic on
> > > >this point, saying that one's work cannot, except by mere chance,
> come
> > > >out right unless you adhere to this principle.  It changed my
> smithing
> > > >forever, and for the better, even though I say Peter ruined it for me
> > > >forever.  Knowing what I was capable of, I no longer had the excuse
> to
> > > >do sloppy and imprecise work.
> > > >
> > > >If you think these may be boring... well, I never find swinging a
> >hammer
> > > >so.  But even so, when you start producing these objects such that
> they
> > > >begin to look closer and closer to machine-made (to a degree), I
> think
> > > >the sense of satisfaction will speak for itself.  Flatter planes and
> > > >straighter lines than you perhaps thought possible... very satisfying
> > > >to know they came from your own hand, that much I can and will
> promise
> > > >you.
> > > >
> > > >I will also way that if your work doesn't improve and you are certain
> > > >that your attitude and attention were correct, the result may call
> into
> > > >question things such as your hammer, posture, anvil height.  Don't be
> > > >afraid to change these if by chance things aren't improving.  Either
> > > >that
> > > >or you're already a perfect smith. :)
> > > >
> > > >Best wishes.
> > > >
> > > >	-Andy
> > > >_______________________________________________
> > > >Manage membership or unsubscribe at:
> > > >http://mailman.qth.net/mailman/listinfo/theforge
> > > >theforge mail list group photo site is
> > > >http://www.photoaccess.com
> > > >Login:  blacksmithblacksmith at hotmail.com
> > > >password:  anvil
> > > >___________
> > > >
> > > >
> > >
> > > _________________________________________________________________
> > > MSN Life Events gives you the tips and tools to handle the turning
> >points
> > > in
> > > your life. http://lifeevents.msn.com
> > >
> > > _______________________________________________
> > > Manage membership or unsubscribe at:
> > > http://mailman.qth.net/mailman/listinfo/theforge
> > > theforge mail list group photo site is
> > > http://www.photoaccess.com
> > > Login:  blacksmithblacksmith at hotmail.com
> > > password:  anvil
> > > ___________
> > >
> >
> >
> >_______________________________________________
> >Manage membership or unsubscribe at:
> >http://mailman.qth.net/mailman/listinfo/theforge
> >theforge mail list group photo site is
> >http://www.photoaccess.com
> >Login:  blacksmithblacksmith at hotmail.com
> >password:  anvil
> >___________
> >
> >
> 
> _________________________________________________________________
> FREE pop-up blocking with the new MSN Toolbar - get it now!
> http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/
> 
> _______________________________________________
> Manage membership or unsubscribe at:
> http://mailman.qth.net/mailman/listinfo/theforge
> theforge mail list group photo site is
> http://www.photoaccess.com
> Login:  blacksmithblacksmith at hotmail.com
> password:  anvil
> ___________
> 