[TheForge] Small shop questions

[Dan Scheid]

A few months ago members of The Forge kindly gave me advice on setting up a
basic shop.  It's taken a while, but we are now at the point of actually
building the shop.  Although I had hoped for more....I'm ending up with a
15' x 20' shop with some additional outside space that will be under cover.
Before we move forward, I was hoping for some more advice.

(1)  The shop is will have a concrete floor (I know that's a debatable
issue, but I like concrete) and will be stick built.  It has 8' walls and
will have some windows & a cupola for venting.  I was also able to position
it to get a good breeze from prevailing winds.  I primarily use a gas forge
(very similar to the one Gabe showed that he's building....in fact mine was
from David Lisch).  I also have plans to eventually add a side draft coal
forge or a bigger gas forge for larger pieces.  So, the question is, should
I have any concerns about using a fairly small stick built structure for the
shop?
/
my shop is 12X16 works just find here is my web page under shop you will see
my lay out and NO it is not that claen anymore
http://home.earthlink.net/~chevalvolant/flyinghorseforge.html
Dan Scheid
?

(2)  Given the small space, I don't plan to divide it up to separate the
"cleaner" area from the forge.  Does anyone have tips on maximizing the
space utilization?  At the ABANA conference someone suggested making
workstations are movable as possible by putting everything on wheels.

As always, your thoughts would be appreciated.......
Bettina
_______________________________________________
Manage membership or unsubscribe at:
http://mailman.qth.net/mailman/listinfo/theforge
theforge mail list group photo site is
http://www.photoaccess.com
Login:  blacksmithblacksmith at hotmail.com
password:  anvil
___________